u/mm-nyc

so, in a small office we have a spectrum internet and verizon, the spectrum is dhcp and connected to the primary wan port of the sonicwall firewall. i configured the sonicwall for auto-failover, plugged in the verizon to the X2, but wasnt getting an ip address on the verison x2 port... verizon said we need to be in pass thru mode, as by default the verizon router wants to be 192.168.1.1 and do nat and give out ip asddresses, so there was a conflict with out sonicwall whice is 192.168.1.1... SO i connected an ethernet cable from my laptop to the verizon router, logged in , and configured it for bridge/passthru mode, rebooted router, and walah! sonicwall now get the public ip address of the verizon router.... BUT it still is giving out an SSID and allowing wifi devices to connect, when it does, the sonicwall loses its wan port X2 ip address and fails...GETS CONNECTION ERRORS.
id thought by putting it into passthru mode the wifi was turned off automatically.

so, i now need to log into the verizon router and turn of the wIifi , ssid, etc... BUT how do i access the router now.
previously i cennected with ethernet cable and went to mynetworkconnection' and it brought me to the verizon router login...
this time i cant even get to the verizon router.
SO MY QUESTION IS: NOW THAT THE VERIZON ROUTER IS IN PASSTHRU MODE, HOW DO I LOGIN TO IT DIRECTLY TO TURN OFF THE WIFI SIGNAL BEING SENT.

so i plugged my laptop in dhcp ip mode, directly into lan1 of the verizon router, treis mynetworksettings.com, tried the gateway address my laptop was shoing in ipconfig/all and it didnt work.. so how do i login to it noew that its in passthru mode currently.

thanks

mm

i had a tivo back in the early 2000's, thus i have some old videos on my hard drive in .Tivo format (file extension)
VLC doesnt play them, window media doesnt play em... how can i get to view/play these video files?

thank you!

2016 crosstrek started having blower motor issues, worked on power setting 1 and 4, then all worked, etc...I replaced the blower motor resistor, it worked for a day or so, then started up again. The other day all 4 speeds worked, then, today it cut off totally, no fan speed dial worked, a/c light doesn't come on, recycle air light does...I check the 3 fuses in box by drivers left knee, all good, then quickly replaced the blower motor and blower motor relay, still nothing...

Im not good at the electronics gremlins... so what's the approx cost a mechanic to check power and maybe its the control panel harness, or something.. Ballpark? Thank you.