u/saws904

Before you say send it back, the seller has already said I can return for a full refund and a replacement can be sent, I’m working on a remodel and the door is supposed to be installed in 4 days, so not enough time to get a new one made. The seller gave me permission to attempt a fix before shipping back.

Ordered a mahogany door, 1/8 veneer, and during shipping some form of oil or grease leaked or got spilled on it. It’s unfinished, any ideas on how to remove it all from the door?

Worst case, I’ve also considered cutting the whole lock stile off, remaking it, and using dominos to reattach the lock stile. Would dominos be strong enough? Or should I cut larger floating tenons?

Any serious help is greatly appreciated! Thanks!

Looking for some help with my buddies truck. He’s getting the classic blinking 4hi light. I’ve read and watched everything about cleaning the actuators on the transfer case, setting the timing and reassembling. Followed everything probably 30 times at this point.

The actuator works and engages the front drive shaft for about 10 seconds and then kicks it back out. I’ve noticed that the front diff is not engaging and the front wheels don’t rotate during that 10 seconds while it’s engaged. I’m now in an egg vs chicken predicament. Is the ECU not engaging the front diff actuator because it’s sensing there’s still an issue with the transfer case actuator not engaging properly OR is the ECU kicking out the transfer case actuator because the front diff actuator isn’t working/engaging?

Not sure which comes first, don’t want to also mess around with the front differential actuator if the problem still lies with the transfer case.

Any help is appreciated!!

Help! How to remove oil/grease from Mahogany

2008 SR5 4WD Help