u/suburban-dad

Team,

Sometimes the Sora 30 dives down but nothing happens...I see it moving slighly forward or backwards (the belts and rollers move), then it stops, the front slightly tilts upwards, then back down, moves a little bit, tilts up...lather rinse repeat.

I have pulled out of the pool, let it drain completely, and slowly drop it in the water and I see the app updates to diving...but after that...not much.

Any ideas what's going on?

If so, what grit did you use? I have 40 and 60 on hand. Any challenges with the angle?

I am looking for some feedback if anyone's used MEGAcmd to backup their NAS to MEGA...Does it work as expected? Can you view the files you've uploaded via web interface or is it commandline only? Does the tool work as expected when running on my QNAP w/QTS 5.2.29

I recently bought a diskless ts-873A to replace my tvs-673. Disks are labeled and according to instructions I inserted the disks from old into new NAS, picked the option to set up new NAS while preserving data.

Running raid 6 across 6 disks. RAID is now synchronizing. A Smart error is reported but I’m not that worried.

I want to expand the raid from 4tb drives to 8tb drives, fix the SMART error and expand the raid from 6 to 8 drives.

I’d love to get some advise on order of operations. I don’t want to replace the drive with SMART error with another 4tb drive as I want to expand to 8 drives at 8 tb each.

Hi all,

I have a flower-bed that have the traditional landscaping black metal barrier around it

I have created no-go zone around it. However, the no-go zone encroaches into the perimeter so when the the mower mows the perimeter, it notices its coming up on a no-go zone and skips it. This means there are areas in the perimeter that doesn't get mowed.

I've tried creatively to get around this but since a no-go zone requires you to complete it, I haven't quite figured out how to tell it to 'ignore' the no-go zone if it overlaps with perimeter.

I tried to remove the no-go zone and hoping that the touch and smart sensor knows what's going on when the Lymow butts up against the metal barrier, but so far that doesn't really work either.

Lastly I have a rather large flower-bed that I have created a no-go zone around. Is there a way to have the Lymow mow around the perimeter of a no-go zone?

Filed a ticket with support but figured I could ask here if there any quick troubleshooting steps to try?

all of a sudden my One Plus isn't charging..the terminal are clean, there's power to the dock, the RTK works...but the mower just won't charge. Not sure exactly sure what simple steps to try first.

Anyone have some step by step instructions for how to reconfigure everything after placing the RTK in its final destination?

Ideally I would simply delete the maps and redo them but I just noticed the RTK troubleshooting section of the app doesn’t show any satellites so I’m sure I have to reset something and start over.

Thanks in advance!