Not disclosing the system name so my name is the one that get stamped on it, but I will give you a screenshot!
The black hole is a little difficult to see but is up to the right of the neutron star.
I have been attempting to use a "one rom" inside my A500 to replace the ROM inside at the moment which I think is faulty. On all ROM images I attempt to use the screen is straight black (instead of white with the original ROM) except for the 2.0 diag ROM, that eventually ends up on what I think is a black screen but the image rolls incredibly badly. I have been using the cli tool as to my knowledge it is the only one that lets you force the emulated ROM into 16-bit mode, which I have been told was necessary for my rev 5 board. The board originally had a 1.3 ROM inside and went from grey to white, then stayed on white with the CPU light staying on for ~2 seconds and then blinking off and then on for another 2 seconds and repeated. Please help. Thank you in advance.
I picked up my second crt, which was given to me for FREE by my uncle. I think I am going to use it as a monitor for my Amiga and spectrum+2. It is only 14" but that will be great for my purposes. (The N64 is just there to make sure it works I normally play that on my 21" Trinitron.)
Can I fix this?
Look at the center of the image at the black spot.
Is my agnus socket missing a pin? It black screens on boot and caps lock light goes on 6 times when pressed, however there is no power light but drive light is green the entire time please help I replaced the CPU already as I heard a bad CPU could cause black screen issues but here is a picture please help!! The black screen on the TV is the output.