You must install PhysX 9.17 (from google) , or it won't open
Install mono and gecko
1280x720p High texture + High anti aliasing, rest low (you can crank it up but my phone was heating)
Proton-9.0-x86_64
Base Wrapper + Astc (game doesn't boot without astc for some reason)
Dxvk 1.7.2 (others either don't boot up or freeze js before matches or give low performance, atleast for me)
Box 4.3/performance/4 cores
Beautiful game just started playing
Low settings (Veryhigh textures) + 960x544p
(You can cap it to 30fps for stability)
Proton 10 arm
Wrapper + 1.7-async
Fex 2605 + performance + Aggressive load (all cores)
I had pink textures especially the floors and some effects at first, but after installing the updated leegao_bcn the issue was fixed and colours were accurate. 1280x720p + high
Proton 10 arm64ec
Wrapper Leegao
1.5.5-async
Fex 2605
Performance
Aggressive + 4 cores
Dimensity 8300 8gb, 1280x720p
Proton-11.0-arm64ec-0
Wrapper (astc) + dxvk 1.11.1-sarek
Fex - 2605/ performance
Normal Load (don't change it or the game won't open again). Game executable is 32 bit unlike base pes 17. Celebration in the video is capped at 30 fps.
Game goes up to 90 fps but capped at 60 to adjust game speed. You can also use these settings to run pes18 it's heavier than pes17 but looks even better (ran with 720p + low at 50-60 fps but 90% ram usage) I had to make space for modded pes17 (50gb) so deleted it
My fav game btw (only wished Guilty Gear Strive had lower requirements bcoz I want to play with Cyberpunk Lucy)
Settings -
Start the game with BootXrd.exe only.
Proton 10 arm (9 doesn't work, 11 is weird)
1.10.3-async
Wrapper/Wrapper V2
Custom preset [Tso, Halfbarrier, X87, Multiblock, SmallTscScale, Volatilemetadata, Monohacks}=> all on]
So I tried various combinations while testing this game
And what I found was, (idk if it's in other phones as well) when I start the game in any container (fex or box) with wrapper leegao + (any dxvk) the Fatalities or X rays in the game work fine but when I select wrapper or wrapper V2 the X rays and Fatalities glitch or freeze.
The issue here is in wrapper leegao the models are low polygon and the effects in game are gone, like the fire or ice or mana effects don't appear only their shadows or lightings remain, it feels weird.
Then I tried the game with Wrapper/Wrapper V2 + Dxvk 1.7 async (note only some dxvks like 1.5.5/ 1.5.5 async/ 1.7 async/ 1.11.1 sarek/ 1.12.1 sarek works with the above wrappers) the game looks better obviously bcoz of the Lighting and effects intact but the moment I try my fatality or X ray move the game glitches and freezes.
Anyone faced similar issue or just me?
I have posted 2 videos in the comments.
‼️Another thing (the renderer shows opengl for wrapper leegao and Dxvk for wrapper and wrapper V2)
I have been facing an issue with winlator mali since a few days now, the container shuts down by itself after sometime of gameplay (game doesn't lag and nothing is bottlenecked during gameplay) This is not a game issue from what I have seen, the issue persists with 2 games I have with different containers, proton 9-x86 and proton 10arm64, arkham origins and nfs hot pursuit 2010. It doesn't lag before closing, no errors, no logs just plain shut down.the games run fine on bannerhub tho. 🤔 Anyone facing similar issue? I know one other user faced this same issue but I can't seem to pinpoint what's the issue exactly.
You can mention other issues related to winlator mali here
I wasn't even trying too hard I just revived everyone who was nearby while also managing to get some kills, see it's that easy, but some medics just use it to heal themselves and ignore the rest. It's like I'm playing cod
Idk why this is still such an issue after so long they should make some kind of penalty system for not fulfilling a milestone for each role lol
Game - BATMAN ARKHAM ORIGINS
Forgot to add in Title 🤦🏻♂️
Firstly the settings (btw I spent 5 mins writing everything on community config and it said failed to upload 🥀bruh)
1280x720p - Dx10 all settings + Fxaa=high turned on except Physx (1600x720p works good too)
Proton-9.0-x86-64
Box 4.3 - performance
Dxvk - 1.10.3 used in the video (but I recommend dxvks with async)
★Install Physx, Xna framework, recommended Vcredists
★To run the game
—Open game folder>bmgames>bmengine.ini>search and edit d3d10=True, d3d11=False>save the file.
★To change language from Russian to English
—Open game folder>gog-1908486934.info (or something similar)>locate and edit "Russian" to "English", and "ru-RU" to "en-EN">save the file.
•Also I tried the game in both Fex and Box with vsync turned on and the later was up to 30% better in max frame output although the stability is similar in both, equally inconsistent but also not as bad (min 7-0 fps, avg - 43-55 fps respectively)
•Now talking about my experience 🤔 the first mission or prologue runs and plays amazing, a few stutters when loading a new area or enemy and missions work well too and overall very playable but the open world will struggle a bit so you have to tone down the settings as they have increased the particle count of snow heavily from previous games like arkham city. And since you will be running the game in dx10 the lighting gets better as well especially the lens flares and dynamic lighting and dude the cape physics is so much better even without turning on physx.
I wanna play L4d2 but can't create wine containers in Win Mali only proton, I tried winlator bionic 3.1 hotfix and l4d2 worked there but I don't wanna switch between mutiple emulators 🤔
Just me or anyone else facing the same issues?
Game - Rise of the Tomb Raider
I want to know if it's worth playing this on a D8300 8gb ram 🤔
Image is unrelated.
😭 Bf3, Nfs the run, Medal of honour, Warfighter all have the same issue, loads intro, freezes after a while.
Without drivers I don't think it will work out anytime soon or if anyone has a solution feel free to share
​
Sorry I could not record videos as hyperos likes to kill background apps (screen recorder) for fun...
But I have screenshots (NOT CLICKBAIT, you can clearly see the frame stability) from prologue till first deployment to really test the stability as I didn't wanna bait other mediatek users with false hope.
If you have played this before, then you know none of these screenshots are from cinematics and are gameplay only!
The settings on youtube for dimensity processors suck (my game kept crashing after 5-7 secs of the intro which ran on 1 fps with their settings)
👍🏼 Use my settings if you have dimensity.
Poco x6 Pro -1280x720p low (30 fps locked) (60 fps unstable if 8gb ram, BUT still can manage 55+ most of the time unless you are riding horse at full speed or running at full speed) I used a controller!
Ofc 12gb ram is ideal and can maintain 60fps better.
Settings -
Bannerhub v6 (6.0.8)
Proton10.0-x64-1
Performance
Dxvk 1.10.3-async
Box-0.37-b2
Make sure to change windows to windows 7 in wine configuration via virtual desktop
I was afraid to try this on my phone for almost a year now, 8gb ram and mali gpu on top of that I had full trust it won't run anything back then lol.
​
I am not convinced that there's only 3-4k mali users in r/EmulationMediatekMali so decided to post in the main sub too, to help anyone with similar chipsets.
Device poco x6 pro 8/256
Bannerhub v6 antutu (6.0.8)
Settings -
Proton10.0-x64-1
Performance
Dxvk - 1.10.3
Box-0.37-b2
Some common environment variables -
DXVK_STATE_CACHE=1
DXVK_ASYNC=1
**Make sure to run virtual desktop and set windows to windows 7 in wine configuration as default
Windows 10 makes the cutscenes run in 4 fps in my phone, no idea about else.
First of all sorry for not providing the gameplay bcoz my ram was too tight so it was killing my recorder even this clip was corrupted but I somehow recovered it thru an app 😭.
Game size only 4gb
Without recording I get stable frames 30-60fps depending on graphics settings and resolution.
Settings -
Proton10.0-x64-1
Stable **UPDATE - use Performance preset
Box-0.37-b2
Dxvk-1.10.3-async
Make sure to run virtual desktop and set the windows to windows 7 in wine configuration for the game.exe otherwise the cinematics will run in 3-4 fps
Bannerhub v6 (latest)
Proton10.0-arm64x-2
Extreme + multiblock + maxinst - 20000
Fex - 20260618
Dxvk - 1.10.3
[NO Frame gen]
Before starring the game open virtual desktop>go to wine configuration>add the blacklist launcher>set the windows to windows 7
Before I was playing on default windows 10 and dude the cutscenes and menu and lobby were running on 4 fps, no fix on youtube literally nothing fixed it, I was lucky enough to tinker with the right setting bcoz I was bored lol, after setting it to windows 7 game ran flawless. There are 2 modes dx9 and dx11 and both run amazing on ultra settings, although using tessalation impacts the fps heavily
The rest of the settings you see on my video are max without impacting the fps badly
Any questions regarding this you can ask in dms
Without recording I get 60 fps and for some reason using gpu passthrough kinda makes it more stable. 🤔 Other games work shit with that turned on... But not this
The intial EA logo anf the bf3 intro plays but as soon as it ends the screen freezes and goes black
Can't seem to find any fix for it anywhere, has anyone else tried running this
1280×720p 30-40 + avg fps (no frame gen)
[UPDATED SETTINGS]
Dxvk - 1.7.2
Compatibility - Proton9.0-x64-2
Translation - stable
Box - 0.37-b1
**The hud wasn't displaying bcoz of a bug, happens with some games but I can assure, it's above 30 fps. maybe dip here and there sometimes but playable.
Note - The game runs fine, but when you look around or swipe/aim, it starts frame dropping, same on codmw2 and farcry 3, it's like the screen is wobbly sometimes, manageable but annoying ngl.(Maybe just an issue with my phone?)
Other than that it works quite well, you can increase the graphics but I was saving my battery so had to use low + medium.
It's a screenshot of a story I posted 5 years ago
Soon it's gonna be a reality, crazy man...