u/Bobzilla2

Now the Gunn Club... Why???? Most Gunn Club members are in the Barclay, so move it down the other end of the ground leaving nothing but the (overcrowded) fan zone at the river end... Insane.

Whinge over...

I'm a sound tech in a medium sized CoE church in the UK (think chocolate box parish church). We've currently got Sennheiser ew100 kit, which is getting tired now. One of our mikes will drop out unexpectedly (usually increasing with distance from the receiver), and it is getting increasingly difficult to get a decent sound out of it (particular with the main vicar). The other is still ok.

There's decent spacing between the frequencies, and the fact that the other is fine suggests that the one that drops out is past it, and an extender antenna won't do anything. There's a possibility that there is a competing frequency, but no guarantee.

What else can I test to try to troubleshoot? My thoughts are test a different lav, and a different frequency on the trouble mic. Anything else?

And if it is fuchéed, what replacement system do you suggest? Budget isn't huge, and spend just be justified. Is a xs-1/2 good enough?

Thanks.

Apparently up for £6m. Seems like our perfect left back...

Yeah, I know, we don't care what the lot in blue down the A140 do, but this is quite big, no?

Perhaps unsurprisingly.

Hi all, I've got a plus subscription and I'm a bit narked by the inability to buy a discounted renewal in DoP - I feel a bit taken advantage of. So if I let my subscription lapse (in August), but pick it up again in November for black Friday, do I get access to all my old PS plus monthly games or are they gone?

Thanks

Was just reading on Wikipedia, and he's in there. Who let him in? When is Nunez going in, on that basis?

So my DS5 got stick drift, and I fixed it. The good news is that the stock drift is entirely cured. The not so good news is that the button on that stick is not working.

The switch itself is working fine - it tests identical to the other one on a multi meter. However it isn't registering on the calibration app on my pc.

Any ideas as to how I can test further? I don't think I have lifted the solder pads, or at least not two of them, but I can't say for sure.

Thanks.

Hi, quick q. And before you ask, no i will not be installing any electrics on a consumer unit.

I'm looking at doing the prep work before an electrician comes and finishes and had a few questions.

1 - are there any specified heights for a consumer unit in a garage? This is a secondary simply for the detached garage, not the primary in the house, and is fed by a 6mm armored cable suitably buried.

2 - same for sockets? Want them about waist/chest height.

3 - sockets in a ring or spurs? They will be going all around the garage, and I'd assumed a loop.

3 - i want the wiring enclosed in which 20mm circular conduit, and was going to leave the insulation on (i know some take it off). Any issues with this?

Thanks.

And yes, i know that any work i do will have to be checked and signed off by the commissioning electrician.