What cable do people recommend to use the Pro 2 with a PS5. I'm guessing I'll need an adapter that takes combines HDMI and power to the Pro 2. And a USBC extender, as the PS5 won't be that close to me.
It's been difficult to find recommendations. And I'd rather not spend $100 on the Viture Pro Mobile dock just to do HDMI conversion. It's shocking that Viture doesn't have an adapter you can buy from them directly.
Am I crazy or has the new firmware caused a bug? After doing a filament swap on my print, the nozzle temp uses the nozzle temp from the built-in firmware temp of the MK4, and stops using the nozzle temp that I've set in my gcode.
So for example, I've set my PLA nozzle temp to 195 in PrusaSlicer. The built-in PLA nozzle temp on my MK4 is 215. My print uses 195 at the start. But after doing the filament swap, the nozzle temp for the rest of the print is now 215.
As the title says I started listening to the latest Gamescast and noticed it’s the Games Daily episode instead. The Games Daily upload seems to be the correct episode.
I'm printing a small token that has a hole for an NFC tag in the center. The first bridge infill layer going over the gyroid infill has small gaps on the sides for some reason though. Once the top bridge infill covering the NFC hole is started, the entire top is filled in like I'd expect. Is their a way to prevent these gaps?
I know this has something to do with the symbol on top of the token. If I remove the symbol the weird gaps go away.
PrusaSlicer 2.9.5 · Core One+ · 0.4 mm HF nozzle · 0.15 mm layer height
Layer 23 - Gap in bridge infill around hole
