I am about 40 miles south west of DC and getting a great signal for WPHL17 in Philly.. Conditions and bounce working in my favor. About 160+ miles to their towers.
Having a great year so far with my peppers, This was todays pick of green bells.
Finally figured out some tweaking with Fightbox R10-PRO spinner (or trackball or any mouse for that matter). Retroarch on Mint Linux. The settings are outside of Retroarch itself and the key is to turn off the mouse acceleration for the specific device you are using and adjust the tracking at the OS level from the console..
In my case, the spinner is detected as device ID 16 (Arduino LLC Arduino Leonardo id=16) and I used the following:
xinput set-prop 16 "libinput Accel Profile Enabled" 0, 1
xinput set-prop 16 "Coordinate Transformation Matrix" 1.7 0 0 0 1.7 0 0 0 1
This turns off adaptive acceleration (constant speed per revolution) and sets the static acceleration at 1.7 (faster than default). The 1.7 can be adjusted higher for quicker movement, lower for slower movement. For games like Kaboom this tweaking can make a HUGE difference. For some games, 0.5 makes more sense.
OBD2 trans temp indicated seems like it might be reading high. On or near startup it is reading about 170F. Cruising around it is reading in the 240-260 range. I have since put a trans cooler inline after the radiator cooler and it is hovering around 220-240ish. Fluid is only about 10K miles old and still looks fine and has the right levels. Thoughts?