▲ 5 r/CeX

CeX sold me a strange Galaxy S7 with a mix-and-match of different firmwares

Hello all,

I just purchased this S7 that for some reason is missing VoLTE, VoWifi etc etc.. and upon plugging the phone into SamFW this is what is reported.

For those who aren't well versed in this, I'll give a rough explanation next to them

Model : SM-G930F ->This is the 'normal' UK/Global Exynos S7. I say 'normal' because I believe this to be a fake, masked identity of the phone

CSC : XAA -> The reason why vowifi etc doesn't work is because the CSC is for the US unlocked devices, on a UK device

AP version : G930FXXU7CRH2 -> AP is just the actual OS itself, and this is normal for a global Exynos variant

BL version : G930VVRS8CRK1 -> Bootloader: this is built from the SM-G930V which is the S7 for the Qualcomm Snapdragon 820 variant released in the US. In fact this is even the code for Verizon Wireless in the US. This is impossible to run on a UK Exynos chip so the phone's internals has a US motherboard

CP version : G930FXXU7CRH2 -> Probably thinking nobody noticed they forced the global modem file on a qualcomm device probably to try and mask it again

CSC version : G9350ZZH3CRH1 -> I think the worst of them all. The seller has managed to flash a S7 Edge (NOT the S7 i purchased) firmware intended for HK and China - these regions have dual SIM slots so I think they did this to bypass the regional locks used by Samsung

Bit : 7 -> This phone IS a bit 8 verizon wireless usa bootloader but reports binary 7 so i can't update it or it risks a soft brick

IMEI : 356xxxxx1435399

IMEI2 : 356xxxxx143539 -> also horrible and a consequence of flashing the chinese firmware onto this phone: as chinese variants are dual sim and the UK is single sim, it has made up/'hallucinated' a 14 digit IMEI as the software expects a Dual SIM phone but physically doesn't possess a second sim slot

SN : R38xxxxxxx

Lock status : NONE

MCC : 234

MNC : 30

USB mode : AT,MTP

Unique number : CE0xxxxxxxxxxxxxxxxxxxxxxxx

Android version : 8.0.0

This is dastardly, i've never seen such an egregious mix of different softwares before. Would you say this is eligible for a full refund under cex's warranty? If this is a bit confusing do ask me, this is the first time I've ever seen a phone like this

Cheers

reddit.com
u/HSPA_UMTS — 12 days ago

Help with strange bug!!!

This thing can fly. I'm currently in a high-rise building on the top floor and it came out of nowhere!

Central China

u/HSPA_UMTS — 2 months ago

Help with idiomaticity!

I've been listening to Scarlatti for a while now. Without any kind of formal training, I just decided to try his style in Musescore.

Can anyone advise of things he probably wouldn't have done in his time - e.g. that weirdly sounding PAC at B57?

TIA

Sorry for low quality media

u/HSPA_UMTS — 3 months ago
▲ 2 r/eGPU

LACT reports link speed Gen 1 x4, LinkSta in Lspci reports Gen 4 x 8 over oculink...

Hello,

I am using Kubuntu 26.04 + the Thinkbook G7+ IAH with the built in Oculink port with the GPD G1 eGPU. LACT is reporting the link speed to be generation 1 x4, which is unusable whatsoever, and lspci says 4x8 which isn't possible at all over oculink.

Does anyone know how to definitively check what the actual link speed is? Both of these are questionable.

Thank you

lspci

LACT

reddit.com
u/HSPA_UMTS — 4 months ago

Beginner: cannot compile android app

Hello

I'm trying to compile this app: https://github.com/jesther-ai/open-u60-pro/tree/main/mobile/android/OpenU60 as an alternative to the default app provided for the router.

The dev didn't provide a gradlew file, so I went ahead and 'gradlew wrapper'.

From source, it will first fail here:
A failure occurred while executing com.android.build.gradle.internal.res.LinkApplicationAndroidResourcesTask$TaskAction
Android resource linking failed
ERROR: /root/open-u60-pro/mobile/android/OpenU60/app/src/main/AndroidManifest.xml:8:5-27:19: AAPT: error: resource mipmap/ic_launcher (aka com.openu60:mipmap/ic_launcher) not found.

After making a png in ~/open-u60-pro/mobile/android/OpenU60/app/src/main/res/mipmap-mdpi, it continued successfully until:
Task :app:compileDebugKotlin FAILED
e: file:///root/open-u60-pro/mobile/android/OpenU60/app/src/main/java/com/openu60/core/model/ConfigModels.kt:80:28 Unresolved reference 'isNullOrEmpty'.
e: file:///root/open-u60-pro/mobile/android/OpenU60/app/src/main/java/com/openu60/core/model/ConfigModels.kt:81:84 Argument type mismatch: actual type is 'kotlin.ByteArray?', but 'kotlin.ByteArray' was expected.
e: file:///root/open-u60-pro/mobile/android/OpenU60/app/src/main/java/com/openu60/core/network/AgentClient.kt:182:20 Public-API inline function cannot access non-public-API property.
e: file:///root/open-u60-pro/mobile/android/OpenU60/app/src/main/java/com/openu60/feature/config/ConfigToolScreen.kt:169:55 Unresolved reference 'KnownKey'.
e: file:///root/open-u60-pro/mobile/android/OpenU60/app/src/main/java/com/openu60/feature/tools/speedtest/SpeedTestScreen.kt:86:65 Unresolved reference 'KeyboardArrowDown'.
e: file:///root/open-u60-pro/mobile/android/OpenU60/app/src/main/java/com/openu60/feature/tools/speedtest/SpeedTestScreen.kt:93:65 Unresolved reference 'KeyboardArrowUp'.

I'm building this on WSL Ubuntu. I have tried Visual Studio on Windows to no avail.

If you need any more info please ask me

Thanks so much!

reddit.com
u/HSPA_UMTS — 5 months ago

Hiya,

Only seeing an FM carrier on 107.6, no audio at all. Their DAB output is working fine.

Can anyone confirm my suspicions?

Cheerio

reddit.com
u/HSPA_UMTS — 5 months ago