Hi all, I'm trying to print multicolor and when it does the color transition, layers don't stick at all. I incresed the temp from 220 to 222, lowered the speed of inner and outer walls and I don't know what else could it be
Snapmaker u1
Elegoo pla
Snapmaker orca
Infill is the triangles one
Speeds are 80 for outers and 180 for inners
Hi guys! I've printed this on my snapmaker u1 and I don't know what could be causing this. Always when I try multicolor printing it comes put with this problems.
I did another attemp increasing temp and reducing speed but now the white PLA doesn't stick with the pink PLA.
- Snapmaker orca
- Elegoo PLA 220c nozzle temp, 60c heated bed temp
- Outer layer is 80mm/s and inner is 180mm/s, infill is 250mm/s
- 0,2mm layer height
Hi hiys! I've printed this on my snapmaker u1 and I don't know what could be causing this. Always when I try multicolor printing it comes put with this problems.
- Snapmaker orca
- Elegoo PLA 220c nozzle temp, 60c heated bed temp
- Outer layer is 100mm/s and inner is 230mm/s, infill is 250mm/s
- 0,2mm layer height
Hi guys! I've printed this and I don't know what could be the problem, the colours doesn't blend propertly and random lines like that appear, why could that be?
Elegoo PLA
Hi guys! I want to create containers that can hold liquids or food inside but I've heard that it's gonna leak between layers, or create mold so I thought about epoxi resin but I'm still not sure.
Is it possible to make something 3d printed and food safe, and also being capable of holding liquids?
Hello guys! I'm printing ASA and I saw it comes out with a very bad qulity. Parameters are almost default and chamber temp is 50c. Bed is 100, and hottend 280c.
I'm a rookie with ASA so any advice will be helpful, thanks!
Hi guys! I'm a newbie with ASA, is this sound normal? Is z-offset too low? I increased it and I still hear it, also increased z-hop