u/ISwearMyRX7Runs

We have continued drilling after we fixed the broken wood blocks on the mast head pulley. We are now at 100' deep. We seem to be going at about 5' per hour or so through solid shale. We have hit water but it is only about .2gpm or a bit less. So we will continue going deeper as time allows. Here's a vid of it operating.

Here is the first post for those not familiar. https://www.reddit.com/r/WaterWellDrilling/s/S5zuOarSQH

I replaced the clutch and forks on my wife's 2013 focus as well as the rear main seal since it started seeping oil. Though the oil leak was not the issue with the clutch. It was slipping bad and throwing a check engine light. Shifts great again after component replacement.

My new to me exmark 36" vantage s. I wanted a smaller mower because my yard is way too small for the 60" I have. So I picked this up locally a few weeks ago and have cut the lawn once with it. It works beautifully. I also bought the bagger for yard cleanup which worked great.