u/JimBridger_

The G7 of .340 on these bad bois is beating 25 135's and 6.5 144's.

Feel like these and the Berger 120's is going to take some wind out of the 25cal resurgence in PRS. I'm also guessing that we'll get a 6mm 112-116 eldm's in a year or so.

TL;DR These three parts (motor, dc speed controller, battery tray) + wiring are all I need to make an adjustable battery powdered vibration mechanism right? Or am I missing something?

Looking to make a simple battery powered vibration mechanism to attach to a volumetric powder measure as the powder being measured is not one that likes to have a uniform density with gravity alone. Other people have found vibrating it to help the uniformity of dispensing. I'd like to have something a little more elegant than an electric toothbrush duct taped to it.

Have enough experience in small electronics/soldering from building RC cars/FPV drones to not have assembly be an issue.

Will be 3dprinting the enclosure for this.

Thanks y'all

Been pushing my Janome 1078 way to hard doing bag work up to 600D and 10oz waxed canvas + webbing. Any options I should be looking at that seem to rival the Consew cp146rl? Gotta have the straight and zigzag, has to be portable.

Got a great deal on a savage 12 to make a very cheap trainer. But it has a 1:9 barrel so trying to figure out what is the best long range target bullet I can push out of it w/o getting a new barrel.

The research I’ve done so far seems like a 77gr Berger OTM/ SMK is the best I can do for 1:9. 73/75gr ELDM’s look to be taking a BC hit in Berger’s calculator.

But wanted to ask the hive mind in case there is something I missed out there.

Just a heads up for those who might be looking. Great deal for the best budget LR glass.