u/Low-Expression-977

I’m trying to configure the axiscope on my fredh built stealthchanger.
The V2 was configured before that as a sensorless endswitch andall things went great.
Si the step to stealthchanger with tap was small.
However … when trying to configure axiscope I can’t access the axiscope through a websocket (http://my-printer-ip:3000 with my printer-ip the local ip address of my printer obviously.
The service is running in mainsail, i noticed the new macros, but there is not much happening when I push the macro config-all-offsets.
I get an error evaluating gcode_macro calibrate_move_over_probe object has no attribute gcode_macro _calibration_switch.
I think this has to do with the fact than I’m running TAP which has no Z endswitch but I don’t know how to resolve this.
Can anybody assist or provide example or clear guidelines?

I’m building a self sourced V2. 350mm with A4T toolhead.
I’ve everything in house to adapt to stealthchanger.
Some decision to be made:
Can I start with the integration of the A4T as if it was going to be part of the toolchanger, i.e. use the shuttle ad tap for Z calibration, add umbilical from the start, no X and Y endstops but sensorless homing. I would then add all the rest of the stealthchanger.
What do you think, guys? Bad idea?
I have experience with the trident (also self sourced).
Any alternatives you’re thinking of?

I’m investigating the implementation of stealthchanger on a V2 which I’m currently building.
Instead of the relative complex door buffer, I would use 2040 extrusions at the front and install a 2020 extrusion in between for the modular dock.
As such I’m not losing space and add some additional strength in the frame.
Any thoughts if this would be a good idea?

Why do I need ti login every 5 to 10 minutes in 2.4.0?
It’s annoying and my color presets are gone???

Isn’t there a checkmark to keep logged in?

I would use A4T in stealchanger on a new self sourced Voron V2.
I noticed in one of the videos a 2510 fan with 3 wires and in another 2 wires (speed control feedback I guess). Which one is preferred?
Should I install LEDs on the A4T? Canucks seem to be against it …