Hi, do you think this would be a good soldering practice desk? With some resistors and stuff of course.
https://pajenicko.cz/prototypova-univerzalni-deska-50x30mm-oboustranna-1.27mm-2.54mm-smd-tht
I recently bought a soldering pen and a FM/AM radio kit. Today I started building it, but it didn’t go according to the plan and i made mistakes.
Do you think i can save the board?
I recently bought a soldering pen and a FM/AM radio kit. Today I started building it, but it didn’t go according to the plan and i made mistakes.
Do you think i can save the board?
I recently got into the RTL-SDR area, and was wondering if it is possible to catch meteor scatter using the GRAVES detector from Prague (Czech Republic) with a dipole. I also recently created a python program which takes a screenshot every time there is a change in the dB levels on the 143.050Mhz frequency, and it cought one.
The weird thing is that i recently tried catching meteors durning night, but didn't get any.
Thanks for any advice!
I recently bought a RTL-SDR Blog V4 with a dipole antena (each pole measuring 1 meter, adjustable) and now I'm trying to acquire picture from METEOR weather stations. My setup looks like this: MacBook pro M1 pro, docking station, RTL-SDR V4 (connected to the Mac using the docking station) and dipole antenna. Meteor M2-4 recently passed me with 80 degrees elevation (I was about 800 meters above sea lvl., had the dipole horizontally, each pole measuring 53 centimeters, no trees/buildings in sight), but even then I only acquired a maximum of 5dB max snr, so no sync. Please, any advice what i could improve?
Thank you.
