Login

u/New_Education5151

r/Creality_k2 r/SnapmakerU1 r/snapmaker r/Creality r/DiabloImmortal
▲ 1 r/Creality_k2

The Firmware Confusion... (again...)

Alright when I check crealitycloud.com for K2Pro and K2Plus firmware updates (coz the neither of the machines detect them as OTA, as usual) I have these two:

For K2Pro

https://preview.redd.it/8tlb7lmishah1.png?width=850&format=png&auto=webp&s=e06b81fd635f72b49ba2ff677a1b874d1367ebea

and for K2Plus this one

https://preview.redd.it/t52qx0rqshah1.png?width=854&format=png&auto=webp&s=9685ca27088f32a0400b3ac0d1d3b8f9192ed868

The description in K2Pro 1.1.6.2 and the description details for K2Plus 1.1.6.0 are exactly the same whereas they put the Plus one under another subtitle "Monochrome"

I know some folks noticed this before and imagined the term "monochrome" could stand for Non-CFS devices, but I fail figure out if a K2Plus without a CFS translates to monochrome, why is there no such a subtitle for the K2Pro and why the description of those OTA-undetectable firmwares are carbonbopies of each other then?

(I highly doubt that the "monochrome" refers to solo devices without a CFS and yet it means something else that no one figured out yet)

Any ideas?

Cheers!

reddit.com
u/New_Education5151 — 6 days ago
▲ 3 r/snapmaker+1 crossposts

Bugs with Snorca

I am having theese issues

  • *The printer is in LAN Mode
  • * Stock 1.4.1 Fw
  • Snorca (ver 2.3.4 and I always keep it up-to-date)
  • When intiated, Snorca (win11.x64) hangs at the begining for several seconds..
  • Some days, it fails to connect to some amazon server it is supposed to connect for cloud binding. (not my local internet issue as everything else works) ( WildGuess : Guessing they went cheap on allocating bandwidth with their cloud supplier)
  • For the first print of the day if the printer's DHCP obtained IP address is shuffled, need to re-add to Snorca (buttons unclickable, and main window remains unresponsive)
  • For the rest of the prints on the same day then :
  • 1- if Snorca is closed and reopened, usually asks me to relogin (Go to my above Wildguess)

2- if Sn orca left open for a long time during a print, it simply loses (or times out) the connection to the printer.

As it's current state, Snorca is having all the beta diseases that a beta software could possibly have.

reddit.com
u/New_Education5151 — 15 days ago
▲ 18 r/SnapmakerU1

Cmon U1 where art thou? 😄

Allocated a cozy spot….
Fixed the power cables and automation controls…
Even printed the side spool covers with view windows on them and all.

Importers slacking to pull the batch off of the intl customs. Wth right?

Wanna print a majora mask with 5 gr purge asap dudes, cmooon
😄😄

u/New_Education5151 — 1 month ago
▲ 12 r/Creality_k2

RIP my K2pro and plus I guess

anyone expects KliTek upgrades would be possible for our k2pro/plus machines? I honestly don't...

u/New_Education5151 — 1 month ago
▲ 7 r/Creality_k2+1 crossposts

Why am I getting this error?

Hey guys, cant figure out how to get id of the “Ooops” warning

(See pic1)

* The K2Plus has 0.6 mm original unicorn installed… (no pic)

* CrealityPrint is set with K2Plus 0.6mm defaults (see pic2)

* double checked that nozzle in CP is set as 0.6mm (pic3)

When I slice and it to the printer says the file has different nozzle diameter settings than the printer’s

The model is a genuine .STL and not a .3MF with somebody else’s fancy print settings.

Cant resolve this ever since I moved to 0.6 nozzle from 0.4mm

(Using stock settings on printer and on CrealityPrint)

Any ideas?

u/New_Education5151 — 2 months ago
▲ 2 r/SnapmakerU1

Hi all, just ordered a U1 and impatient to join the club!

My question is is there a native hub for snapmaker community, like Bambu’s makerworld.com or creality’s crealitycloud.com ?

With U1 optimized 3mf models ready to be printed?

Thank you.

reddit.com
u/New_Education5151 — 2 months ago