u/No-Product-9385

Hi all

I bought a 2005 HRH stunning condition (very cheap) runs but no blade action, was told the clutch was gone which it is but turns out the crankshaft is also bent so obviously the previous owner has hit hard lump and broken it without telling me

The 2nd picture is the engine code from the HRH GXV160 the 3rd picture is a scrap engine that didnt turn from a lawnflite 553HRS etc etc that ive had for a while, the crankshaft should be compatible? Correct me if im wrong

So

Ive assembled the engine with the new old crank, piston right direction and everything but it does not turn so maybe there is also something wrong with this crankshaft it might be bent as well unless im doing it wrong

Im hoping to come across another broken honda GXV160 to nick the crank from it but for now can anyone tell me where I can find a compatible crank for it, doesnt have to be original just has to work, and any brands to avoid will be much appreciated

Thanks for reading - Chris

Hi all

I bought a 2005 HRH stunning condition (very cheap) runs but no blade action, was told the clutch was gone which it is but turns out the crankshaft is also bent so obviously the previous owner has hit hard lump and broken it without telling me

The 2nd picture is the engine code from the HRH GXV160 the 3rd picture is a scrap engine that didnt turn from a lawnflite 553HRS etc etc that ive had for a while, the crankshaft should be compatible? Correct me if im wrong

So

Ive assembled the engine with the new old crank, piston right direction and everything but it does not turn so maybe there is also something wrong with this crankshaft it might be bent as well unless im doing it wrong

Im hoping to come across another broken honda GXV160 to nick the crank from it but for now can anyone tell me where I can find a compatible crank for it, doesnt have to be original just has to work, and any brands to avoid will be much appreciated

Thanks for reading - Chris

Hi, could anyone be so kind an tell me what coil this is supposed to be if the numbers still existing

Ive looked at parts diagrams on various sites but none of them bring up that flywheel code only 1200 of 1202

Thanks in advanced

Ive got a BG86C blower here that ive been trying to get working, so ive transferred everything over from a working one (carb, coil, spark, exhuast, fuel lines etc) and going back to the original parts 1 by 1 to eliminate what can be causing the issue, which was a clogged exhaust.

Now ive got another problem, the vibration the engine causes is a whole lot more than my other working one,

My fuel mixture is a bit oil rich due to incorrect measurements but they are both running on the same fuel so it can't be that

So its possible that it might be an internal engine issue?

Im not sure anymore, but its proper wiggly

Thanks all

Chris