Hi! Im going into my second year at KSU, and lived in Korb for my first (and now second) year. Last year, I had my bed bunked and my roomie had theirs down; I hated the layout because their desk was between the beds and id have to ask them to move constantly to get up and down from my bed 😭
I was wondering and hoping if someone here had a better Korb room layout (with photos possibly!!) that I can take inspo from :)
Thank you!!
Hi all! I recently did some maintenance on my P1S (greasing everything, cleaning) and left it sit for about two weeks (didnt have anything to print). I started it up tonight to do a small overnight print and can hear a weird grounding noise when it prints the circle layers of the tree supports. Im not sure if you can hear it in the video. I was hoping if there was a fix to this?? I can hear it in the other room!!!
Thank you!
Hello! I am super new to motors and electronics in general. I am trying to power a 60mm x 60mm x 25mm fan with a portable charger but the fan I have is a 4 pin and needs an adapter (with a switch preferably) in order to be powered.
I first plugged it into the power bank. It started to spin but instantly stopped. I wondered if there wasn’t enough power going to it. I then plugged it into a charging block I have (works fine) and the same thing happened. I have no idea why this is happening, from all of my research I thought everything would work fine?
If you have product recommendations please let me know. The only requirements I absolutely need are the highest power fan I can get with a 4 pin to USB (or USB-C) adapter at the size of 60mm x 60mm x 25mm. Adapter needs to have a switch to be turned on and off without interacting with power bank.
I need this figured out, any help would be greatly appreciated!!
Links below to the products. (All from Amazon)
Fan: AFC0612D 60mm 6025 60x60x25mm 12V 0.60A 4-Wire 4Pin PWM Double Ball Bearing High Volume Air Cooling Fan
Adapter: MECCANIXITY 2PCS 12V Step-Up USB Fan Adapter Input
5V Output 5-12V DC PWM to USB Adapter Cable 11.8" for 3-Pin/4-Pin PC Cooling Fans Computer PWM Controller
Power Bank: INIU Portable Charger, Smallest 22.5W 10000mAh Power Bank, USB C in/Output Fast Charging 3-Output Mini Battery Pack Charger with Phone Holder for iPhone 17 16 15 14 Air Samsung S23 Google iPad Tablet
Hi! Im looking to make my own 3D printed fursuit fan prop (monster can). I already have it modeled and am looking for the actual fan parts to fit in it before I print. Im not very good with electronics so im hoping that someone here will be able to help!!
60mm PC fan (5V)
AA Battery pack maybe?
portable charger? (no button?)
I want the switch to be accessible from the outside of the can so I can turn it on and off without disassembling the whole thing so if I do go with the AA battery pack the USB port for the fan would need to be on opposite or adjacent sides of the pack so access to the switch would be possible.
Just need some help brainstorming on what to do as I never had to deal with electronics before now (but im so excited to try and learn new things!)
Thank you :3