u/NotSloth1204

Finally got around to modeling and printing a blow off valve spacer for the Ford 2.0L and 2.3L engines.

I didn’t have factory drawings to work from, so this was a lot of measuring, test fitting, tweaking, and learning along the way. The goal was to make something that keeps a clean bolt-on fit while adding that sharper turbo vent sound.

It uses 3 M6-40mm bolts and two O-rings:

1” OD / 7⁄8” ID / 1⁄8” thick
1 3⁄4” OD / 1 11⁄16” ID / 1⁄16” thick

For anyone printing it, I recommend ABS at a minimum since it lives in the engine bay. Supports are strongly recommended for ABS, and I’d stick with the wall settings provided with the model.

Pretty proud of how this one came together. It’s always cool taking an idea from “I think I can make that” to an actual functional part.

link to model: https://makerworld.com/en/models/2817763-ford-2-0-and-2-3-liter-blow-off-valve#profileId-3137393

Happy with the model! I saved about $4 (literally almost nothing but fun project).

You need 3 m6-40mm bolts, two Orings, being

1” OD
7/8” ID
1/8” thick

1 3/4”OD
1 11/16” ID
1/16” thick

Printed out of ABS!

When I put power to it it auto drives. It’s an AE-6 ESC/rx

Is this thing fried? He told me it was having issues so this was my knowing and I bought it hoping to fix it