Got the cc2 tophat for my cc1..... Best $40 purchase, should be an easy part to design to fill the small gap leftover, after i design and print the part I'll upload it to printables/makerworld
So i had originally upgraded my printer with the heartforge mod that lets you use bambulabs hot ends. I recently got the canvas upgrade and it comes with a new fan. New fan enclosure and a new magnetic sensor on the heatbreak fan..... The new fan enclosure is not compatible with the heartforge mod..... What i had to do is unscrew the new magnetic sensor off of the fan enclosure and i drilled 2 holes in the heartforge modded fan enclosure and screwed the magnetic sensor in (Careful with orientation if do it) put it all together and it works. At first i had the sensor backwards and it was giving me an error that it couldn't cut filament.... Flipped it around and it works
So i have had the thermal carafe for several years but it always has bothered me when i get coffee in the morning and then i put the cap on i will hear air escape as pressure builds and ill try and tighten it more and it will stop then start hissing again. My solution was to add another gasket in between the normal cap gasket and the cap, i used a round silicone gasket. No more hissing. The gasket that comes with the cap is too thin. In the photo my additional gasket is the one that looks grey
I was worried it would be too big for my hands but it fits and feels great