DUG shoppers

Hi shoppers, I work at a Jewel Osco and my store dorector claims that im cheating the acupick system by not scanning things in right away. The way that I understand picks per hour to be calculated is total items picked divided by the amount of pick hours. For instance, 393 items picked in 4.2 pick hours is 93 picks per hour.

The store directors claim is that by scanning in multiple items at once, like collecting all the frozen items, then scanning them in it raises my picks per hour exponentially. But that wouldnt make sense given my picks per hour divided my pick hours is usually between 80 and 90. Because of his belief he says i cant use a basket while im picking even though when i do use a basket I usually average 100-110 pph.

How are picks per hour calculated?

How do I address this with him?

Quite honestly, it makes it much easier on my to use a basket as I usually collect multiple items at once anyways. It also doesnt make sense that scanning in multiple different items at once would affect my pph any different than scanning in multiple of the same item. For instance, when you scan a weight tag for apples, you input the amount of apples you are picking. Following his logic that would make my picks per hour peak. Additionally, there are people at my store who average 90-100 pph without a basket, so I dont understand what makes my pph so unbelievable.

Am I crazy?

Is there some sort of proof I can show him?

reddit.com
u/Primary-Web-9425 — 1 day ago

What ring would you reccomend?

I really want to get a smart ring. It started because an advertisement for a smart watch band. I really want to track my sleep without a watch because I find them uncomfortable. Plus, most smart watches dont last a long time. That brought me to rings. Im between the ringconn 2 and the samsung galaxy ring. I have a samsung phone so the samsung ring would integrate better, but j keep seeing things about battery degradation. Are there any other rings I should look at?

reddit.com
u/Primary-Web-9425 — 9 days ago

1st rejection from ibew

As the title suggest i was rejected for my first application to my local ibew. The letter said that they will reconsider me in a year if I can get 1000 hours of electrical work in or do 1 year of schooling related to it. I intend to do both.

My question:

How do I get experience? Everywhere wants full on electricians, and i cant find anyone looking for an apprentice near me. I live near Northern Illinois University. If you have any leads or suggestions so that I can get my 1000 hours in that would be greatly appreciated.

reddit.com
u/Primary-Web-9425 — 12 days ago

Octopus 1.1 crtouch

I am switching from skr mini e3 v3 to an octopus 1.1 mainboard. Everything works except for the probe. I am using a cr touch. When powered directly the pin deploys. Using debug commands i cant get the probe to do anything.

In the photos are my my board where the probe is plugged in, the wiring of the probe, and the port for the probe. Everything is plugged in correctly as far as I can tell.

My cfg:

[Bltouch]

Sensor pin: ^pb7

Control pin: !pb6

X\_offset: -40

Y\_offset: -10

Z\_offset: 0.760

Stow_on_each_sample: False

Pin_up_touch_mode_reports_triggered: False

u/Primary-Web-9425 — 1 month ago

Octopus 1.1 problems

I am switching from skr mini e3 v3 to an octopus 1.1 mainboard. Everything works except for the probe. I am using a cr touch. When powered directly the pin deploys. Using debug commands i cant get the probe to do anything.

In the photos are my my board where the probe is plugged in, the wiring of the probe, and the port for the probe. Everything is plugged in correctly as far as I can tell.

My cfg:

[Bltouch]

Sensor pin: ^pb7

Control pin: !pb6

X_offset: -40

Y_offset: -10

Z_offset: 0.760

Stow_on_each_sample: False

Pin_up_touch_mode_reports_triggered: False

u/Primary-Web-9425 — 1 month ago

Helmets and gear

Im getting my motorcycle endorsement in 2 weeks, and im starting to pick out gear. O would like full gear (over pants, gloves, and jacket) just to play it safe. My sister who used to ride is insistent i need a shoei helmet, but they start at almost $500. While I dont know much, I do know that it needs to be DOT certified. What helmets do you reccomend? Ideally, I want a modular helmet, with shades built in. I was anticipating about $500 for the helmet. Is that unrealistic?

Jackets and pants:

I have no idea what to look for with jackets or pants. What kind of certification does it need?

Gloves:

I know gloves need palm sliders. Is there anything else important?

I plan to get a sports bike as my first. Either a ninja 400, kawasaki z400, or a Honda cb500f. Im leaning towards the cb500f if I can find one under $4500 used. Otherwise, ill get a used ninja 400. Thanks for reccomendations and commentz!

reddit.com
u/Primary-Web-9425 — 2 months ago

Multi color unit

Hi yall,

I have an ender 5 with a btt octopus v1.1, and ebb36. Upgrades are klipper, mercury one(dragon hf and orbiter 2.0), triple Z, and stealthburner. I on the octopus I have 3 extra stepper drivers available. I hate to not utilize the board to its fullest extent. So, what would be the best mmu to use the 3 extra stepper spots, while not interrupting the extruder?

Ive looked at box turtle, but that requires 4 stepper. I have started looking at ercf, but i wanted to see opinions too.

Sidebar: I will either use this to do multicolor (3 different colors) or I will do multicolor and one petg lane for supports.

reddit.com
u/Primary-Web-9425 — 2 months ago