u/RumAndGunRun_

I'm working up some loads for my .375 Cheytac using 400gr Lazers. Right now I am seated within their recommended specs.

So far groups have not been terrible holding about .80 MOA which is just under what the TOP GUN Prediction by Brian Litz said it would be. (I use this loosely for group size expectations)

For anyone that has used these, what was your seating depth? Was it within their specs or did your rifle like them seated outside the manufacturers recommended seating depth.

All load development so far has been done with virgin peterson brass.

As the title states My first Tacoma, wanted a smaller truck to maneuver a little easier than my old 7.3L diesel in town. (Still keeping the 7.3 for pulling trailers) My Tacoma is a 26 2.4l turbo 4x4 Sr5.

​

I wanted to come here and see what everyone is using for the following.

​

1 anti theft devices- i know tacomas arnt the most stolen but I like the peace of mind

​

2 what bed caps are people using. I prefer ones without windows to keep prying eyes out.

​

3 steel bumpers/ brush guards. This truck will see lots of county roads and pastures.

After 10 months its finished. My .375 cheytac. 36inch bartlien T5 brake, A6-7 supermag stock, stiller tac 408, trigger tech diamond, mirage ulr 60moa rail, eratac 70 moa adjustable mount and tract toric 4-25x50 (160 degrees of total elevation adjustment in the scope alone)

WW1 (turtle shell) camo cerekote by old irons cerekoting. Barrel finished and fitted by Alamo precision

This would be my first EFI conversion and want to know if getting this intake/ EFI kit/ and some injectors would be all that is needed or am I missing something. Also if anyone has ran this intake what's your opinions on it. Not trying to squeeze out tons of HP just want somthing different than big cab sitting in the top of the engine. Car 70 chevelle 454 BBC th400 fuel system already has an efi ready baffled tank with 60psi pump and regulated return.