u/Sensitive_Shape_4712

Hello everyone, I am trying to calibrate my pla filament. I am following Factorian Designs' calibration tutorial. And I am at the max flow rate calibration step. I use Orca Slicers default calibration tools.

I know I have high speed filament so I wanted to start the test at lowest: 15 mm/s flow and highest 35mm/s flow. After setting the calibration and slicing I check my print speed and it seem too low to me. The reason is even with default low flow rates (12 mm/s I guess) I was able to print higher than 150 mm/s speed but now with testing 35 mm/s flow it only prints with 182 mm/s speed.

Considering that bambu studios default printing speed is 200 mm/s which I use generally, isn't 182 mm/s test speed too low for this test to replicate real printing situations. Am I missing something?

I am tryin to set this corners fillet radius to 5.5 mm but it does not exceed 3.4 mm. I can only set the radius 5.5 mm when I changed the perpendicular edges fillet radius larger than 5.5 mm. It seems like I can't set a edge fillet radius more than its perpendicular edges fillet radius. How can I set 5.5 fillet radius while keeping 3.5mm on the other edge?