u/SoilEquivalent5192

Never ridin never worked on never owned a minibike and im trying to put a ghost 212cc racing kart engine from harbor freight on a mega moto 80 frame has this been done and how easy is it and what are the common hiccups will I need a custom throttle cable and anyone else with a mm80 frame that has done this if you can dm me I would greatly appreciate it I think I might have the wrong throttle cable. Will I need an exhaust and how easy is the chain to get set up onto this frame? I had a frame before and my main problem was I was not able to get the chain to stay on for any amount of time please anybody that has done this private message me or comment thank you.

New to small blocks and this is this sound any kind of normal I for sure have a header leak on that side

So I’ve had this bike we’re probably about two weeks and I got it bare frame. I’m trying to put everything on it to get it running and rolling under my own weight I tuned the card from my last post, tightened the engine down and the chain still pops off. I’m thinking that I need tensioner. If not, what are your guys’s thoughts This is also like a Frankenstein frame. I haven’t been able to actually figure out what frame this is. I think it’s it’s a couple connected.

Just put this minibike together it’s a predator 212 ghost my first ever minibike ever even attempting to build never even ridden one. I still haven’t cause this one doesn’t drive yet. Do I need attention or to stop that from happening for reference? This is a chain while it’s on the bike.

Context I was driving my Camaro with a small block 350 in it and when I was turning into come home I lost power my lights on dash were still on but no throttle whatsoever so I took the key out started it back up it took 2 tries and then it fired right back up got home let it sit in my garge for about 10 mins then went back out tried starting it again started flawlessly like it cranked right up first try let it run for a little about 3-4 minutes ran just fine turned it off then turned it right back on another flawless startup and then revved it a little and it seemed fine but the random loss of power freaked me out I don’t think I stalled it becuse it wasent a sudden abrupt stop but I was going in between gears at a lower speed I’m also 18 and this is my first carburetor car does the video sound normal it’s got stiffer valve springs I’m told I don’t have a real build sheet but I bought it from a very old man that’s locally selling his hot rods because of his age

Is there any bolt on no fab work required suspension for a 1984 z28 that is stiffer than stock I don’t want to drop the car on its nuts either maybe a half inch lower would be fine

Is there any bolt on no fab work required suspension for a 1984 z28 that is stiffer than stock I don’t want to drop the car on its nuts either maybe a half inch lower would be fine

Slight built 350 small block with the 5 speed I daily drive a focus st and this is my first carburetor car I’m 18 years old and fresh outa highschool give a young buck some good advice on driving maintenance and overall treating it right