a remnant of greatness and a remnant of ages long past
u/Vanguard_2-2 — 12 days ago
u/Vanguard_2-2
▲ 0 r/NinebotMAX
Simple solution for monorim rear suspension not working with the latch of collapsing mechanism
You can replace the bell with the latch and it will engage with the hook on the rear suspension.
I've used an m365 latch because I require the signal bell but I've tested this method with the original g30 latch and it worked as well
u/Vanguard_2-2 — 12 days ago
looking for a gcode/3mf of only the plate swap for C1M
is there a gcode or a way to make one with the webpage that would only make a single plate swap?
i've used similar with original swapmod to print multiple different things from makerworld while at work and my current attempts at editing the existing gcode files yielded no results
u/Vanguard_2-2 — 12 days ago
Help me rule out layer lines seen from some angles
The printer is snapmaker u1, pla dried for 7hrs at 55°C(but the issue happened on other filaments). Also printed a cube with 30mm sides with 1 perimeter wall, 0 infill and 0 top layers with all speeds set to 20 mm/s, it still had that problem on all walls.
Experienced the problem from the start so I don't think it's due to uncleaned z rods Slicer is snapmaker's orca
Can it be related to acceleration or z belt tension?
u/Vanguard_2-2 — 1 month ago
some of my latest FDM prints of the toon style ships 2/2
more ships coming in the future
u/Vanguard_2-2 — 2 months ago
▲ 101 r/TheSojournAudioDrama
some of my latest FDM prints of the toon style ships 1/2
Fletcher detaches from Sioccana's body and held to it by magnets, the rings of the Wanderer spin
u/Vanguard_2-2 — 2 months ago