My tower antenna broke off, if I snip off the u.fl connector on this radiomaster elrs antenna and solder it to the pad outlined by the black line on the board, would that work? Or should I just do the 3.1cm copper enamel wire fix? Also, if I do go that route, would some copper wire from an old 2005 size motor do the trick?
All the motor directions, props, and d shot settings are correct. What am I missing here?
Check this out. 369 ultrasonic knife.
Kinda cool. Kinda useless. Depends on what you're cutting. Sounds like wooshing air in real life. What do y'all think?
Edit: DEFINITELY DONT CUT JALAPENOS WITH IT. It vaporized the juice and is like a mild pepper spray.
I just got this chain from my father, and it has a unique Hallmark "UNOAERRE" inside two circles. Does anyone know anything about this brand? This chain is at least 20 years old, probably much older, and it has another interesting stamp on the clasp "BREV." Anybody know what that means? Just curious to know more history of this piece and or brand.
Parts list:
Volquarsten competition kit (mostly all internals, trigger + firing pin and extractor.)
Rugged oculus .22 suppressor
Osight SE (green)
3D printed RMSc mount (waiting for lobos to restock)
3D printed bolt charging handle extension.
Maximus +1 follower
Tandem kross follower button.
​
Looking to replace the bolt with the matrix precision gold pdv one or the volquarsten but it's very pricey at $300.
​
I love this gun so much! It's so incredibly quiet with subsonic rounds and quieter than my pellet gun with CCI quiets!
What do your rugers look like?
EDIT: ISSUE SOLVED. the problem, was simply that I hadn't crossed my TX and Rx wires when connecting the VTX to the flight controller. Hahaha how embarrassing 🤣
I can't get the custom osd from betaflight to show up in my goggles x. I have the walksnail moonlight on a pavo 20 pro. It's plugged directly into the HD VTX port on the board which from what I've read online, should be uart 4 so I've changed the peripherals for u art 4 to be my msp output, but still no OSD. Custom OSD settings on my goggles are set to auto, but it still doesn't work when it's set to betaflight either. If anyone knows anything, or has experienced this problem before and knows how to fix it please let me know, thanks.
I can't get the custom osd from betaflight to show up in my goggles x. I have the walksnail moonlight on a pavo 20 pro. It's plugged directly into the HD VTX port on the board which from what I've read online, should be uart 4 so I've changed the peripherals for u art 4 to be my msp output, but still no OSD. Custom OSD settings on my goggles are set to auto, but it still doesn't work when it's set to betaflight either. If anyone knows anything, or has experienced this problem before and knows how to fix it please let me know, thanks.
Edit: I fixed it. Turns out my serial ex was set to the wrong UART. But I still can't configure the gps to the correct UART. Every time I click save and reboot, it wipes all the settings in the ports tab. Anyone know why this keeps happening?
I installed the HGLRC m100 mini gps on my pavo 20 pro, and when I went to configure it in betaflight, I changed the settings in the ports tab. Turned on gps for uart 3 and set the baud rate. When I clicked save, it changed everything. When I tried to turn the quad on and connect to my radio, (I know it connects because it gets telemetry), but none of my controls work, and it won't arm. I know it's probably a simple fix, but betaflight pisses me off so much because things like this happen all the time, and I don't always immediately understand what went wrong or how to fix it. What do I need to change to just get my quad connected and flying again? I don't even want to bother trying to configure the gps anymore.
TLDR: I'm trying to configure the M100 mini gps in betaflight on my pavo 20 pro, but when I click "save and reboot" it keeps wiping ALL of the settings in the ports tab.
Just upgraded my camera and VTX from the walksnail mini lite to the moonlight. The cool part was I had an extra canopy, so I just removed the old one with everything still in it, and fitted the new stuff to the new one and put it in. It was a bit of a stretch to get the VTX to fit into the standard pavo 20 frame and canopy, but it worked. I saw there's a bunch of nifty 3d printed frames I could use, but my printer is acting a fool right now.
Picked up this once at Costco today as my first bar to start my stack. I could just hear my dad in my head the whole time saying "I bought this oz Krugerrand at an airport for $800" and "I would never buy at this price" haha. But I have a jewelry business, I've been making gold and silver jewelry for a few years now, and mainly buying silver. The gold I've used was from recycled other jewelry. This is the first bullion I have purchased.