My other post started fire storm because of my “dog shit grip” and the cut the body guard left on my right knuckle
Look at my grip and in general, what is wrong?
The body guard is so thin my right knuckle pulls right up against the slide. This gun will require I change where I place my right thumb or buy a beaver tail from eBay
I’ve seen many people hold a gun like this so what did I do wrong?
Who shot the best group?
20 rounds into each group. Ignore the carry comp groups. Those had more rounds.
10 yards standing unsupported. Shot my own reloads
Took the carry comp out to the range for the first time and it was making good groups I guess
Did it shoot left like everyone says?
YES!
This gun was angry with me!! It cut me up bad. Wanted me to treat her bad but I was still gentle.
I think I need a beaver tail on this gun to prevent the slide bite
The gun has my DNA all over it now!
One lite prime strike but other than that it ate up 180 rounds. 30 were hornady hollow points.
I put that lite strike in the gun again and it fired.
What do you think of the groups for the carry comp?
7 yards standing slow shooting unsupported
Don’t know what I was thinking. I was 20 years old and I just stopped showing up. Just never called or anything. Young and dumb/idiot straight up no sugar coating it
Do they blacklist you for all eternity so you can never go back?
Is it even worth applying?
I’ve been thinking of getting a body guard since it will be easy to conceal but starting a new caliber that is more expensive than 9mm seems like a hassle to be.
The P365 factory grip module doesn’t provide a good grip. The Shield X feels way better but has longer grip.
I just have to verify if this will work on CA version.
I owned the P320 with the Wilson Combat grip module and it was awesome.
Two questions
How does the size of the P365 Wilson grip compare to original, Shield X, Hellcat series or other similar guns?
Is the grip angle and feel the same as the P320 version?
Is the comp version worth $170 more? I’m saying no! What do you say?
I saw the regular version for $379 and was expecting $60 more for comp version but the wanted $550
Local mom and pop shop wants $499 for comp so at least that’s better than big box store
What are you guys seeing locally in prices???
Xtreme bullets website says
4.2gr of titegroup
1.150” OAL
I’ve been loading 3.9-4.0 gr at around 1.140-1.147
My guns have had no malfunctions with this load
I ran out of xtreme and picked these other up
Would I have issues if I used the same data for these?
-Berrys are .356 but their website state: “Load data from any load manual or website can be used. Full-metal jacketed, lead bullet, or plated bullet load data can be used as long as the following standards are adhered to:
The data contains the correct grain weight of bullet.
Berry’s max recommended velocity is not exceeded. (This info is displayed on bullet boxes and product webpages.)
Standard Plate Bullets Max Velocity: 1,250 fps.
Thick-Plate Bullets (TP) Max Velocity: 1,500 fps.
- HSM are .355 like Xtreme bullets I was loading but I can’t find any loading data on their website
Reloading 9mm on Dillon 650 with Hornady and Lee micrometer bullet seating die
Originally I was using the hornady die and had different measurements so I got tired of that and bought the Lee micrometer bullet seating.
Even with the Lee die, my bullet seating is not consistent. The OAL length can measure anywhere from 1.140-1.147”
Xtreme load data from their website calls for 4.2gr at 1.150” 115gr RN
I’m targeting 1.140 OAL with 3.9-4.0 gr TITE GROUP xtreme 115 gr round nose bullet
Using mixed brass. Should I be worried about these inconsistent measurements?
I don’t think the typical bullet trays work on this stand. Anyone have a bullet tray for this stand?
using DILLON 650
The patio area started leaking last week during rain for the first time since I’ve lived here 9 years. I get up on the ladder to take a look and I see this.
What is the best way to fix this?
I went to Home Depot and the worker told me to get a tube of “Rapid set NON-sag sealant and adhesive. hybrid silane polyether”
What do you guys think?
The patio area started leaking last week during rain for the first time since I’ve lived here 9 years. I get up on the ladder to take a look and I see this.
What is the best way to fix this? I went to Home Depot and the worker told me to get a tube of “Rapid set NON-sag sealant and adhesive. hybrid silane polyether”
>I have tiles that look like cement material. sorry cant post a picture
>
Last week on Tuesday I went into SO with my certificate to add a second gun to my CCW. I was told for some reason people have had their finger prints not show up in the system anymore and I would have to redo them. Also had to refill the CCW application from scratch.
Luckily no extra cost.
Bad thing is that they said it can between 5-35 days to get my updated CCW.
Why is this happening? Any one else going through this?
How can we get their attention to make this already?
Is it me or does it feel like the Echelon has sold very well but after market support is still slow. Hardly any 3rd party slides. Not many grip modules
What about a P365 type of Echelon with the small size? I guess this would eat up the hellcat sales so that might be a big no no