Icp failure 6.0
Randomly happened one morning, don’t drive the truck much
Randomly happened one morning, don’t drive the truck much
07 F250
Having some weird problems recently with the stock turbo. On startup I cannot hear the turbo whistle from the exhaust. My map and baro are identical, also just changed the ebp sensor. I noticed that when you start to drive after it warms up you hear almost like a screech and then you hear the turbo spooling. After that the truck acts normal until it cools down again. I have read about it possibly being a stuck unison ring but wouldn’t that cause it to happen all the time? My boost is reading anywhere from 5-12 psi on normal acceleration and 20-22 wot. Any thoughts?
I noticed earlier that after starting my truck and driving around the lot I could not hear the turbo spooling at all. My boost gauge read anywhere from -.55 to about 1 psi. Seemed abnormal and when I got the rpms up to 2000 or so I heard the turbo kick in. My 30 minute drive was fine, but after pulling on to my road and going about 10 mph I noticed that it was not spooling again. No codes came up, any thoughts?
I noticed earlier that after starting my truck and driving around the lot I could not hear the turbo spooling at all. My boost gauge read anywhere from -.55 to about 1 psi. Seemed abnormal and when I got the rpms up to 2000 or so I heard the turbo kick in. My 30 minute drive was fine, but after pulling on to my road and going about 10 mph I noticed that it was not spooling again. No codes came up, any thoughts?