PSA; the recent android app notifictaion changes might have reset your notification settings
I use "Do Not disturb" (DND) mode while I'm sleeping and night my car got towed because the apartment sticker was not on my windshield. When I woke up I had like 20 "sentry mode alarm was triggered" notifications. I set it so those "your car is getting stolen" notifications override DND. The recent app update turned those back off again. Check yours.
They nerfed service mode air suspension
All the options are gone unless you buy service mode plus now
a strange problem
I'm using GRBL in an arduino uno to control a moving piece in a science museum exhibit and when I'm connected to my phone everything works fine, but when i connect it to a raspberry pi apparently there is enough EMI that it thinks that the limit switch is getting hit when it is not? anyone run into this before?
I just went to find HBO in the browser and it automatically launched in theater mode
Floppy headlight
My girlfriend hit a curb pretty hard and afterwards the driver's headlight was kind of floppy. The headlight itself was mounted hard to the car and did not move. But it seemed like the aim was bouncing around. I finally got fed up and took the headlight out and found the adjustment pops out. Turns out that little ball on the end is supposed to fit into that slot in the third picture, but it was dislodged. I kind of aimed the adjuster down and fed it back into that slot while reinserting the adjuster and now it's all happy again. No new headlight needed. Still might get matrix later this year. '21 plaid
Entertainment while we wait
I saw this, and now you have to too. Chet Falizek- former Valve cool guy
Neo 2021 stick fix
I was having a problem with my trusty aya neo 2021 where the right stick didn't want to center correctly unless I pushed the right analog trigger all the way in. This sounded like a moisture problem on how and I opened it up it was obvious that soda had somehow made it inside of the sick. I tried cleaning out the old stick but the problems persisted so I found a suitable replacement on eBay. I hacked out the old stick. Kind of like I do for my valve index repairs but one of the pins took a pad with it. I ended up running a white jumper from where I figured out that pin eventually made it to to the PIN on the back side of the board. Now it calibrates fine and everything is working wonderfully. Sidenote; how did I just now find out this thing has rumble??