19:20, Starlink lost connection.
19:21: MikroTik noticed it was down.
19:26: Starlink showed 206.214.239.194, meaning it could not connect to Starlink’s POP.
19:44: Starlink got a 100.x.x.x IP again, meaning it could connect to the POP.
19:49: Connection was back to normal.
19:51: MikroTik noticed it was up again.
tldr: Starlink lost connection for about 29 minutes during heavy rain (not 48 minutes like Starlink log says).
translation, "Told by the employer to clean the aquarium on top of the stairs (it is first floor void), safety is questionable."
back in November 2025, my months old oracle is making different noise while grinding, then I noticed grinding result isn't always consistent, like whatever I set, the result is always different, when I take the upper burr, clean it, and wanted to put it back, it stuck, I wasn't able to put it back, if, I twist the metal part against the plastic part a little clock wise, without removing the pin that sets the upper burr setting, I can put it back in the oracle, at first I use 1mm thick double sided tape at the side both side, it works for week, and problem came back, second, is a 1mm stainless steel both side like in the picture, but without the bend, it works for weeks, but problem came back, third is this bended stainless(same stainless as before just bended) both side, now my oracle has been grinding all my coffee very consistent.
TLDR: I added 2x 1mm bended stainless plate and now my breville is grinding my coffee consistently.
sometimes when I copied a text I can't paste it.
Google pixel 8 Pro CP31.260608.007
not reliably reproducable, but happened 3 times, am I the only one with this issue?
when it did this, I will straight away notice, like the lack of clipboard symbol on the left after copy or toast notification, and even when I use text editor on gboard.
any way to check what happened to cpu 100% at this time? like it shouldn't have anything to do at 3 to 9 am, no one is even using at that time. ethernet is the internet port(green at 250kb), bridge is the client (blue at 250kb)
it happens daily.
edit: log says "router was rebooted without proper shutdown, probably kernel failure" "kernel failure in previous boot" "out of memory condition was detected" "Automatic supout.rif file generated due to service malfunction, please contact MikroTik support and supply the generated file"
this didn't happened the day before, so...
edit2: ipv4-high-fragment-thresh value isn't even listed in mikrotik web, like lowest is 512KiB for 64MiB of RAM, hap lite only have 32MiB. so...
I can't even set it without console. maybe a bug.
Like others says to reset it, I did, now still monitoring cpu usage, it can still goes to 50%, lets see how it goes tomorrow.
edit3: cpu didn't spike, no kernel failure, after reset. I am not sure why last reset went wrong.
solved. and Thanks for the help.
ini waveform yang secara otomatis tersimpan tanggal 22/05/2026 14:03:13(GMT+7) dari listrik PLN sebelum mati 22/05/2026 18:44:00(GMT+7).
Saya belum pernah melihat waveform bentuk ini sebelumnya.