u/scooter_farts-stink

Not a big fan of Ninebots even most VESC this thing should litteraly be growing hair on its balls. I think it said 27kw in ninebot frame from a 5mph roll went to instantly smoking the hell out of even the rear with full rider weight on it. Even high end 72v & 84v 10kw 12kw dont do the hell the mars 8440 with wight and a 19,600w peak putting out 100a per controller and and boosted to 96.6v won't spin rhe rear under weight. I wonder if that think can be close to stable at 75-80mph since most of the VESC are running monorim or that other aftermarket suspension with the air shocks. The stem and connection to the suspension is oem will just a $120 front suspension a steering damper and a fat set of tires be enough to control that thing. Would love to ride it once

Was trying to figure out the best way to do it without looking like i duct taped some junk on it. Basically want a tinted low rising bug/wind deflecter. The one in seen the guy had the regular display and a smaller android auto one both behind the screen blocking direct sun. So there are a ton of assorted options. But I think the one I seen used was off of a sk1 ebike. So after looking this should definitely work on my mars i think. Thats why I used the 2 small 10cm handlbar extenders on the sides over the grips it left that area completely open. Since the headlight height can be adjusted should work put perfect. Do you guys think its too much or looks cool. I really like and will do no matter what people think i just like to hear it since sometimes things look great when i design them in my sleep but different in real life lol.

I always run streets but since I maxed the budget buying the scooter itself I have to starts slow so been riding the first 3 weeks on the stock hybrid CST which are fine and I am kind of happy I did roll on them. Because it makes it that much more noticeable when you do swap them. I know its stupid and basic but it just put a smile on my face. The silence and I know there not $120 PMT's but have been running these Ulip 100/55-6.5's on my last couple scooters and there really good. They last well even with my never ending wheel spinning that i always say i have to stop lol. Also the I think its the shape on the side but I always seem to be able to lean more with these then with other tires for $35 each can't really bitch...

My rear Ulip 100/55-6.5 street tire will be here tomorrow, so I can have 2 tires with matching tread. I am also doing my first test paint, just on the face/number plate & screen/shield that covers the headlight. I got a good quality 2 in 1 paint & primer Apple Red high gloss paint. I plan on doing 5-6 light coats then 24 hours to dry. Will see how it looks. I also have a can of matching brand/type Clear coat, ill see how it looks aftee it dries. I think that actually may be enough paint, as I also have a 2'x5' gloss red vynal PET wrap i can add for more contrast if needed. I already added some vynal carbon fiber wrap to tie into the Carbon fiber stem poles and deck lid that I probably won't have for another month or so. Should have the motorcycle seat kit with adjustable height stem top piece, foot pegs & mirrors which i will likely donate since i hate mirrors and have my helmet cam. I.also have a android auto display around here someplace at some point ill prob get a back up cam. But ill wait till I have the motorcycle seat installed. So i can likley mount under on the frame. Will post a few update pics after I get it printed tomorrow. I actually like the way the front suspension looks exposed without the front plate on it. Will definitely replace as its prob blocking dirt and dust from the front fork and kicking up through the front. There are so many more options for upgrades with the space and size of this frame then the fighter mini pro. One quick observation after even changing judt the front to steet tires(do to deformed bead from sitting under something in the closet for months) it already handles better which was great to begin with, and as usual its much quieter and smoother. Will likley switch to the 12x4.5-6.5 after I spend the cash on the stem poles $180 and deck cover $90. Then it should be pretty much done. Hoping G-Space hears people's requests and comes up with a larger display with more info on the GT/GTR as that and not having an app included are the only 2 things that I see that need improvements according to other owners too. Even if they could come up with some form of the GS display that obviously would be dumbed down but could include stupid stuff the original display doesn't show like the brake sensor red exclamation point, motor/controller temps. Other then that after about 30 days and just under 300 miles. Also got to take my fighter mini pro for a ride yesterday after a month of this one and sad to say the Teverun feels like a toy after getting used to the power and ride of the mars.

We'll call it a rain/vape stop been perfect the last couple days. Waiting for my first month's order of initial accessories/the base. And the G-Space seat set should ship from California tomorrow.

Didn't look at the weather yesterday I woke up to 52°f in Pittsfield Massachusetts in the Berkshire mountains (big hills)it the crap hole in the middle of paradise lol. But I checked the weather and the high temp is going to be 69 or 70 perfect SCOOTING weather for comfort also for the scooter itself. I think 70 is perfect to be able to really ride it like its supposed to be ridden without the extra heat of 90°+ weather. Even yesterday it was only 81 but with 80% humidity just felt nasty. Got my helmet cam and Altek Lansing speakee charged up. Topping off the batteey going to try and get out there and get a good long ride in.

On another note, I just ordered my G-Space seat, comes with the adjustable top stem peace, the foot pegs and the motorcycle seat yesterday from unicool had in there USA warehouse for $275 i didn't get the one with the trunk its $325 both are about $25-50 less the G-Space site and there accessories ship from china usully. I since its new i ordered a few accessories from aliexpress. Going to wait till November to order the carbon fiber stem poles and deck lid plus I prob won't change the deck till after winter. The North east is the worst with salt and sand my hardwood floors in my living room looks awful during the winter. From ali I just picked up a set of red/black handgrips with horns, sliders red wire wrap and few decals. Also finished adding a little carbon fiber vynal accents came out really good if I dont say so myself.

Have a great Sat ride everyone WEAR YOUR FULL FACE HELMETS and gloves at a minimum and watch out for tbe 4 wheeled AH that seem to purposefully try to kill us. Ride safe and we'll better not say it...

Had a previous post about adding a little vynal carbon fiber wrap before swapping to the carbon fiber stem poles and deck cover. I think i got it right not so much its overpowering with just the top side peice I think it will help blend the lid in. Lol why did my kid jave to get married in October, can't spend money till after. Love to see the new daughter in laws face if she seen this lol.

I have my oldest kids wedding in oct but after that first upgrade will be the carbon fiber stem poles and deck cover, then the following month will do the motorcycle seat set and front air shock. This winter a buddy of mine that works in a local body shop is going to give me some time on a Sunday and paint what parts I bring in. This month I just ordered some horn handgrips, a better spring seat post for the temp folding seat i am using a few vynal decals. And a Ulip 100/55-6.5 steet tire as i put on a set of had lying around and the bead got warped or something, so I am rolling on the ulip street on the front and had to out the stock CST hybrid tread back on. I am going to do the inner side of the peice i just did. Not facing the rear but the part facing the inside came out pretty sweet just got to hit it with the heat gun get that one little spot out and makes it stick better.

Can't do the motorcycle seat set, carbon fiber stem poles and deck lid and air shock till after my kids wedding in October. I swapped the tires to 100/55-6.5 ulip tires i had one was bad so ordered another a set of black and red horny handgrips a seat pole since mine turnes a bit a clamp to put on the pole since just the cank down doesn't keep them from moving.

Was taking my scooter downstairs this morning so I can sweep and mop my living room, plus I am going to ride today with no clouds in the sky and a high of 74°f today. But upon getting down to lock the scooter to the steel railing. And I seen this it was litteraly mm's off from going deeper then the knobby its a gel tire but at that crazy angle you never know. I just swapped to ulip 100/55-6.5 street tires and the rear had a defect in the bead so I had to put this back on till I order one on the 1st, if it had been the street tire like I have on the front it would be flat as its not gel and I hadn't added sealer yet so that was definitely luck I would be pissed if I got a flat litteraly a day after changing them. No there not 12s I had a set of unused ulip 100/55-6.5s in the closet with something heavy on top killed the bead on the one tire

Last couple min of my ride home perfect evening for a ride in western Massachusetts. Lol cop passed me at the last second didn't see him before I cut across at the end 30 seconds earlier and they might have finally got me lol. Knock on wood not yet

Had my new mars for about 2 weeks now, has a smal developing a small shimmy in the front wheel. I everything is tight as it should be, I tried loosing and tightening the wheel making sure its set right. Also have let the air out of both tires bead looks normal so I assume its prob the same issue several people seem to be having with the latest batch. A small amount of the gel in the tires comes of causing a slight imbalance not dangerous but anoying. I found a new set of Touvot 100/55-6.5 street tires that I got for the 11 inch motors on the fighter mini pro but were to tall to fit between the shock. So wish me luck hopefully the rear motor wire isnt as tight as it looks, have to find my 5 inch zip ties to

After about a week of getting used to her I took it out to the best straight away in the area and aired it out all I can say is holy crap. With the battery at 78.5v she hit 64.2mph on GPS and 65mph on display. She pulled all the way to 65mph and was way more stable then any of the few 60mph scooters I have ridden. This is right out the box not a single mod. Going to lighern her up with the carbon fiber deck and stem poles a front air shock and the motorcycle seat set over the winter. Then I might consider some speed mods. Since this is my keeper I am hoping no more upgrades.

I have tried a ton of different sports cams. And this q29 helmet cam $59 on aliexpress is not a 4k only 1080p with a wide lens. The. I hot glued the speakers into my full face helmet with the internal boom mic on the face part. Couldn't figure out why I was still getting the wind noise it also had an external pin hole mic. So just covering that up leaves the internal mic with voice and when have music playing in the helmet you can here on the mic. Not bad for the price, was planning on spinning around and using as a rear mirror since it broadcast live to my android over wifi. But I think at some point I am still going to get a backup cam with a 5" motorcycle android auto display. But for the money this actually takes excellent videos, especially with 90% of the wind noise gone if i close my visor prob only hear my.creepy sounding breathing boring video just testing the cam but much better now.

Can't wait for hoodie weather almost 72° high today on the Berkshires western Massachusetts

Hard to believe both are 11 inch, just sold my fighter mini pro running latest version ivcu Blade GTII motors and controllers. fighter 11 display and damper kit. Love that little scooter but its not till you see them side by side. Yes I know seats unfortunately i am a disabled vet with blown out knees and even worse hips. And my oldest kid is getting married in October so I decided to just put on a folding seat for now and yes its sealed with RTL. November 1st going to order the carbon fiber stem poles and deck lid and the G-Space motorcycle seat kit w/pegs they cam keep the mirrors lol. But the seat set alone is $300 actually $269 from unicool with usa shipping the same people that I got the GT from for $2429 delivered took 8 days to Massachusetts from the day I ordered. And since there an authorized G-Space seller i still get the G-Space warentee pluss the Unicool/Titan warentee and they make zero scooters so there not going anywhere. They have the GTR for under $3k with shipping. I was skeptical how they beat the manufacturer price like that till they answered every excessive question I had without acting snotty like teverun does. Out of the 7 scooters I have purchased over the years from aliexpress to Big name US scooter sites the best customer services I have had is Unicool with the mars and believe it or not. Emanba on alibaba they always sent parts free no questions asked. Also sent how to videoes with anything more technical then a bolt for a new rider was super cool learned a lot building and rebuilding the old emanba X6 pro Solar p1 3.0 frame same size motors controllers and battery just over 1/2 the price with stock motors and controllers got 3800 miles on that scooter

Actually its a good thing the kids riding wheelies down the sidewalks and downtown streets at 30mph+ now i ride as fast as the next guy when I am out of the way and only going to possible injur myself. But here's one of our local e-bike cops my guess is class 3 at best. Even on my 72v huge scooter if you dont stick out like a sore thumb they dont even notice you.