Login

u/sparkey504

r/extremelyinfuriating r/reloading r/WaterWellDrilling
▲ 3 r/WaterWellDrilling

Filling above ground pool

So I recently got a 22'x52" above ground pool.... what's the best method/procedure of filling the pool using a well? Hose open 3/4 for 30min (tank stays at around 35-40psi while on) then off for 1 hour and repeat? Or run for 30 min wide open (tank gets to around 20psi after several min) and then off for an hour and repeat? To my current thinking the wide open is better due to, while the pump is running it has less restiance as the tank is at a lower psi while running vs pushing against a higher psi while running?

What do yall recommend?

reddit.com
u/sparkey504 — 6 days ago
▲ 20 r/reloading

Yet another press recommendation

So I have a single stage RCBS press i purchased from a cusion years ago and i dont use it do to just how slow it is. I have been wanting to get a progressive press and I think im finally about to get one. Ive narrowed it down to either hornady lock-n-load (non AP due to $) or the lee 6 station ultimate turret press. If i get the hornady I will print out a case and bullet feeder.

My main use will my 9mm, 223 and 300blk out with the occasional 30-06 and 6.5 creedmore... but the last 2 Ill be ok using the single stage as I dont do a lot of mag dumps in those two.

Its probably a pipe dream but eventually id love to be able to automate it using raspberry pi and a servo.

Im currently leaning towards the hornady due to build quality/heavy-duty-ness but the lee already comes with case and bullet feeder. All that said what yalls recommendations?

u/sparkey504 — 3 months ago