Domane+ ALR6 AXS "Creaking" Noise
Attempted to take off the non drive side crank today to get to the motor housing screws since I think they need to be tightened due to some sounds that sound like plastic "crick" or plastic on plastic rubbing and was unsuccessful.
Domane+ ALR6.....turned that bad boy counter clockwise with bike upside down and got to a point where I could freely turn it left and right, but anymore counter clockwise it would crack/pop so I just stopped and gave up. Anyone have anymore tricks? Anyone done this successfully?
Leave the hate unsaid please. Yes I normally take my stuff to a shop but they are not open and it sounded like it was an easy fix. I have taken off cranks before on my other non e-bikes and things have worked. So not sure if something special about these Praxis cranks.
I was able to get to the motor housing bolts and the bolts that attach it to the frame and checked their torque, all is good. I checked chain-ring bolts, all good there.
I removed the motor plastic covering at the bottom of the bike, cleaned it up, put grease on the edges and some grease around the outside of the frame and screw areas where the cover lays. No change, still have some creaking. Its not cleat related since when I just rode it for 2-3 miles with flat shoes it still creaked. When I stop pedaling all together and coast the noise goes away. Its not pressure related it seems because I deliberately was pulling up every pedal stroke and not pushing down and the noise is there, and its there with push pedal strokes.
At this point going to take it to Trek Friday when I have a day off, but anything anyone else can think of to check?