​

Many people ask me for fdm guide and setting, so here it is.

I’ve been working with FDM 3D printing for more than 2 years, and during this time I’ve tried printing many different types of models: terrain, miniatures, vehicles, action figures, and flexi models.

Over time, I’ve put together a set of settings and techniques that work well for me. Many of them have been tested through dozens of prints and experiments.

This isn’t a guide to some “perfect settings” that will work for everyone. It’s my practical reference, based on what I’ve learned from my own experience. I’ll continue expanding and updating it as I gain more experience and discover new techniques.

My printer

I print on a Bambu Lab A1 mini. So far, the only modification I’ve made to the printer is replacing the standard 0.4 mm nozzle with a 0.2 mm nozzle.

This reduces printing speed, but the improvement in print quality is very noticeable, especially when working with small models, miniatures, and fine details.

One of the advantages of the A1 mini is how quick and easy it is to replace the nozzle. No complicated disassembly is required, and the whole process takes just a minute.

Material

I use ESUN Grey PLA+ its cheap and good quality

Slicer

I use Orca Slicer with Dungeons and Derps - Version 1.3 preset (Read readme file from developer in archive First Plz)

I attached it to last post on my payreon ( can't add it here) or you can google it and download newer version.

Orca Slicer is Free and you can download it on their official page

https://www.orcaslicer.com/

Supports and brim

I use Tree Supports for almost all of my prints. They greatly reduce sagging on overhangs and help support difficult areas of the model.

For me, tree supports are especially useful when printing miniatures, vehicles, terrain, and other models with complex geometry.

For long and thin parts, it is often better to tilt the model and use supports rather than print it vertically.

I also use an Outer Brim for almost every print. It helps prevent small parts and narrow sections of the model from coming loose from the build plate during printing.

Tools

Use pliers or a blunt knife to remove supports. Do not use a utility knife. I’ve cut myself more than once while trying to remove supports with a utility knife. Lol

A heat gun can be very useful for cleaning up small imperfections and removing thin strands of plastic, especially on complex models.

A quick pass with hot air can make fine strings disappear and give the model a cleaner appearance. Be careful not to overheat the surface, as too much heat can deform small details or soften the model.

A heat gun or lighter can also help remove the white marks that sometimes appear on the plastic after removing supports.

Cleaning the Build Plate

Before every large or long print, I recommend cleaning the build plate with isopropyl alcohol (IPA).

Even small amounts of dust, grease, or fingerprints can reduce adhesion and cause problems during a long print. A quick wipe before starting helps ensure a clean surface and makes the print more reliable.

What all, thanks for reading! Cheers

5 inch length

I didn't realize just how much had piled up over the mounth until I started going through the archive.

I'm going to clean up my library to prepare it for bigger projects. So if you interested in old bitz collection now is best time to join. Cheers!

500+ wolfs bitz

100 + chaos bitz

20+ soldiers

Terrain

10 + vehicles

Bring a dark industrial atmosphere to your tabletop with this highly detailed gothic terrain container. Designed for FDM 3D printing, it combines heavy armored panels, skull decorations, gothic arches, and industrial machinery, making it a perfect addition to grimdark battlefields, space stations, factories, or hive cities.

This terrain piece prints in multiple parts for clean, reliable results and is easy to assemble. Whether used as cover, an objective marker, or a scenic centerpiece, it will add character and depth to any 28–32 mm tabletop game.

Gothic Industrial Terrain Container

Bring a dark industrial atmosphere to your tabletop with this highly detailed gothic terrain container. Designed for FDM 3D printing, it combines heavy armored panels, skull decorations, gothic arches, and industrial machinery, making it a perfect addition to grimdark battlefields, space stations, factories, or hive cities.

This terrain piece prints in multiple parts for clean, reliable results and is easy to assemble. Whether used as cover, an objective marker, or a scenic centerpiece, it will add character and depth to any 28–32 mm tabletop game.

I’ve been working on this one for a while and finally got it ready for printing. The model is split into 15 parts to make it easier to print and assemble, and I’ve already test-printed it on a Bambu Lab A1.

I also made two alternative parts — an alternative hatch and an alternative gun, so you can customize the look a bit.

One of my favorite details is the ratchet joint in the turret. It gives the turret a really satisfying click-click when you rotate it. 😄

What do you guys think? In

Just finished my new FDM tank model!

Heavy tank "Oppressor"

I’ve been working on this one for a while and finally got it ready for printing. The model is split into 15 parts to make it easier to print and assemble, and I’ve already test-printed it on a Bambu Lab A1 with 0.2mm nozzle

I also made two alternative parts — an alternative hatch and an alternative gun, so you can customize the look a bit.

One of my favorite details is the ratchet joint in the turret. It gives the turret a really satisfying click-click when you rotate it. 😄

Still tweaking a few things, but overall I’m pretty happy with how it turned out. What do you guys think?

Fast, compact, and deadly — the Light Tank "Mosquito" is built to provide rapid fire support for your 28mm tabletop battles. Whether you're scouting ahead, holding key positions, or delivering quick strikes, this versatile armored vehicle is ready for the mission.

Test printed on bambu lab a1 with 0.2mm nozzle. Few parts need tree supports

This kit includes three interchangeable assembly options, allowing you to customize your tank to fit different battlefield roles:

🔸 Main Light Cannon – perfect for engaging armored targets.

🔸 Minigun – ideal for suppressing infantry with overwhelming firepower.

🔸 Two mobility options – choose between wheels or tracks.

🔸 Two hatch options – closed hatch or an open hatch with a machine gunner.

Designed for 28mm scale, the Mosquito is a great addition to any modern or sci-fi tabletop army and is optimized for high-quality 3D printing.

Happy printing, and see you on the battlefield!

Hey! I findshed new model , now with 3 alternative parts.

Download link in comments!

Fast, compact, and deadly — the Light Tank "Mosquito" is built to provide rapid fire support for your 28mm tabletop battles. Whether you're scouting ahead, holding key positions, or delivering quick strikes, this versatile armored vehicle is ready for the mission.

Test printed on bambu lab a1 with 0.2mm nozzle. Few parts need tree supports

This kit includes three interchangeable assembly options, allowing you to customize your tank to fit different battlefield roles:

🔸 Main Light Cannon – perfect for engaging armored targets.

🔸 Minigun – ideal for suppressing infantry with overwhelming firepower.

🔸 Two mobility options – choose between wheels or tracks.

🔸 Two hatch options – closed hatch or an open hatch with a machine gunner.

Designed for 28mm scale, the Mosquito is a great addition to any modern or sci-fi tabletop army and is optimized for high-quality 3D printing.

Happy printing, and see you on the battlefield!

Heavy Tank Armadillo test printed on bambu lab a1 mini with 0.2mm nozzle

Bring overwhelming firepower to your tabletop with this heavily armored assault tank, designed for FDM 3D printing. Featuring a massive main cannon, multiple secondary weapons, and a detailed commander hatch, this vehicle is ready to dominate the battlefield in any sci-fi or alternate-history setting.

The model is optimized for clean printing and assembly, making it a great addition to your armored

Download links in comments. Cheers!

Hey! I made Apc in 28mm scale with commander. Free download link in comments. I test printed it on bambu lab a1 mini with 0.2 mm nozzle. Moveable wheels and weapon tower.

Been experimenting with some chunky toy-tank designs in 28mm scale lately and ended up with this one.

It'd be more fun in people's printers than sitting on my drive.

I printed it on my bambu lab a1 mini with 0.2 nozzle. You need use tree support for some parts.

If you print one, i 'd love to see photos.

Cheers!

Stl download link

www.patreon.com/ToyCore/posts/ork-battle-tank-162685614