Coming from mt where I see all the nodes as soon as I turn it on.
Couple of noob questions:
Do I have to friend every node to see them on the map?
What exactly is an advert?
If I’m listening on the public channel should I see chatter even if we’re not friends?
What do the profile QR codes do?
If there is some resources I should watch or read point me that direction. Don’t mean to be a bother who waste peoples time.
Thanks
Been a follower but first time posting. Here is my noob question.
My goals:
Love 3d printing (advanced setup)
I want a drone
Future me wants an airplane
I’m cheap 🤣
My idea
What kit can I buy or put together now that is most transferable from a drone to a future airplane
Will the same transmitter controller be able to fly the drone and plane
Will the same flight controller be able to be plugged into an airplane to control the servos?
Am I being crazy?
Hey all,
Question. Am I missing something or will regroup by speed be coming? Right now when studio slices it groups by waste or convenience, but don’t we want it by speed?
If I keep the colors less than 5, the waste will be minimal and I’m happy to rearrange the filament if it saves me 1-2 hours of print time.
Anybody know of it’s a feature coming?
Bambu Lab is turning 4! To make this milestone one to remember, we're putting together a celebration with Anniversary Deals, Member Rewards, and Weekly Surprises.
Mark Your Calendar
The Anniversary Sale officially runs from June 15, 2026 to July 15, 2026.
Save Up to 52% Off
Printers, filaments, and accessories — plus a whole lot more:
Claim Your Exclusive Coupon
Subscribe now to lock in your exclusive coupon before the sale goes live. Stack it with the Anniversary deals on June 15!
Young kid needed a block that held pellets but also was an aid on what position to shoot and which target to shoot at! So we designed a 3d printed model to help
How this block helps:
Customizable:
https://makerworld.com/en/models/1507333-air-rifle-pellet-block?from=search#profileId-1577669
Let me know what you think or if we should make some adjustments
Noob and would love some help…
Can someone break down pros and cons or when each type of scanning would be best (ie that’s best in this situation etc)
Happy to be pointed to a resource that walks through each option. Feeling overwhelmed because of the options and I think I should keep practicing with one mode to start with
Cross line
Parallel line
Full field
Auto Turn Table
Feature scan
Marker dots
New Features
1. Added support for the Filament Track Switch
The filament track switch is specially designed for dual-nozzle printers, equipped with 2 filament inlets and 2 filament outlets, and supports seamless mapping between AMS and dual nozzles.
For more details, please refer to the wiki:
Filament Track Switch User Guide | Bambu Lab Wiki
This feature requires Bambu Studio v2.5.3.60 or later / Bambu Handy V3.18.0 or later.
2. Added support for remotely enabling the AMS drying function.
Users can now turn on the drying feature for the AMS 2 Pro and AMS HT from both Bambu Studio and Bambu Handy. Ensure the latest update is installed for both.
3. Added support for printing while filament is drying when using AMS 2 Pro and AMS HT. (Lower drying temperature during printing)
4. Added support for TPU printing on the left nozzle, for TPU with a hardness of 90A or higher.
5. Added support for starting prints over LAN without requiring a USB storage device.
6. Added foreign object detection beneath the heatbed. Requires Bambu Studio version 2.5.3 or above.
7. Added live image display in AI detection error pop-ups.
8. Added a Regulation Certification page for certification e-labeling.
9. Added Purify Air at Print End option.
This option can be set in the slicer or with a button in the UI. It will purify the air for 3 minutes after the print is completed. Requires Bambu Studio version 2.5.3 or above.
10. Added a “Stopping” state after a stop command is initiated.
During this state, the printer blocks user input until the stop process is complete, preventing control command sequence conflicts caused by additional inputs during the stopping procedure.
11. Added a filtering option with cooling mode for the adaptive air circulation system.
This option can be enabled via the slicer or the printer UI, and it’s mainly used to filter the air when exhausting the air for low-temperature filaments. Requires Bambu Studio version 2.5.3 or above.
12. Added BirdsEye camera initialization for the Cutting Module.
13. Optimized the filament color display on the filament editing page, adding support for gradient and dual-color filaments.
14. Added support for Rotary Attachment， Requires Bambu Suite 01.02.02.00 version or above.
New support for laser machining of cylindrical and rotary workpieces by integrating a rotary attachment .
Combined non-contact 3D mesh measurement with motion planning algorithms to generate and execute processing paths for both cylinders and rotary bodies. The overall workflow is streamlined, integrating multiple functions into a single click, and achieves a “What You See Is What You Get” experience through camera-based positioning.
Added a new page for real-time rotary attachment angle monitoring.
This page allows you to adjust the target object to a horizontal position before engraving, ensuring the captured unwrapped image better aligns with the actual object and improving overall engraving precision.
Feature Optimizations
Improved the accuracy of build plate offset detection.
Optimized collision detection for the purge bin.
Improved motor noise-related surface defects at low speeds.
This optimization requires recalibrating motor noise reduction after upgrading to take effect. Important: If rolling back from this version to version 01.01.05.00 or earlier, motor noise reduction calibration must be performed again to ensure proper operation.
Improved the issue where the flow blocker could potentially bend following a nozzle flow calibration.
Known Issues:
Filament PTFE tube detachment detection is temporarily disabled.