r/airguns

Hello fellow shooters! I figured I'd swap out the longer barrel and carbine stock to switch the CP2 back into pistol mode, for a change. Since I don't really have any prior experience with 10-meter air pistol shooting—one-handed, as tradition dictates—do you have any tips?
To start off, I’d practice at 10 meters, and later move on to 15 and 20 meters, just for fun. What kind of realistic results can I expect in terms of group sizes (I know scores are usually measured in points) at those distances?
If any of you have ever measured groups with actual competition match pistols, even better—just so I can compare it to my hobby-target pistol CP2 😁

So after adding a new stock, X3 magnifier and a new pistol grip, I'm thinking of getting a different silencer. Something around 100mm in length and will look the part. So I'm looking for some good recommendations if anyone has any ideas. 😊

this is my first air gun and i need some help.
just got one of these, now i’m wondering is it normal that the trigger doesn’t go all the way down. no co2 inside or loaded. safety on or not, no difference. do i need to put the co2 capsule in for the trigger to work or is it faulty? thank you!

Hey all.

So I was just thinking that I needed an airgun on my homestead over here in Asia. Squirrels are eating up my fruits n whatnot.

I wanted to ask you guys for your knowledge and wisdom. If I were to buy this air gun, it easy to repair? Is there any specific important maintenance I need to do, storage conditions etc etc.

I don't think spare parts are accessible in my country at all. I'll only use it 2 times a year during fruit season for squirrels. Will the gun outlast me? It's preowned and converted about $340usd

(I've used an air rifle 5 years ago on a fruit farm specifically hunting squirrels so I have a tiny bit of experience)

Thanks for the help!

Perfect! I think I have mastered artillery hold and I'm able to hit thing relatively far away. The breathing is a little tricky definitely, hard to not breath while maintaining the elegant position.

I'm using the TX200 MK3 with airmax compact optic. Very cool.

Is it missing something? Anything broken? Unsure if where to go nect

had to adjust windage to quite a bit down on the left side, but it’s hitting a tiny steel target from
50 feet now!

quite the upgrade from iron sites.

Cheers from Maine

Work in progress. Base gun is a old school Daisy Powerline 93 4.5mm, I ghetto rigged a 1/2-20 adapter and used a short 3d printed moderator. The real Mk22 was a Smith and Wesson model 39 fitted with a suppressor for use by special forces in Vietnam

+ a shredded can from a shotshell filled with .177 cal steel bbs

Just took apart my brother’s Sig Sauer 226 Co2 pellet pistol. His mag was stuck & I ended up clearing 10 pellets from the internal barrel.

My question is, what kind of lube should I use on the internal parts? Also, what parts should I lube? I only remember the internal barrel feeling heavily lubricated, but the parts have been sitting out for a day so I’m not sure if anything else was lubed when I took it apart.

Any and all additional info on the cleaning and care of this pellet pistol is greatly appreciated.

(I have a break barrel pellet rifle too, I heard nothing really needs done with them unless you see a loss in power or accuracy. Is that true?)

Acho que meus agrupamentos estão melhorando. Essa é a minha primeira pcp. A trex Montecarlo 5.5, acredito que mesmo ela tendo válvula reguladora ela muda a tragetoria um pouco do chumbo quando está muito cheia e quando tb está aproximando de 120 bar. Mas estou me acostumando. O chumbinho que mais deu certo foi o LDW dome e o rifle dome.

BB rolled out and slide has jammed back on the first shot. I don’t think I’ve done anything stupid (after reading through the manual) - although this is my first time using an air pistol

Have removed the magazine and co2 cartridge.

Any suggestions?