u/Andrzej1987

Before buying, I'd like to practice stabilizing footage in Gyroflow.
Would anyone be kind enough to share some raw footage with me via Google Drive?

Hello everyone,

I need your help.

I bought the XREAL One glasses, connected them to my DJI RC 2 controller, and everything worked perfectly. I even spent some time using the DJI simulator.

Eventually, I decided to update the firmware. Unfortunately, I didn't pay attention to the firmware version that was installed out of the box because I wasn't expecting any issues.

I updated them to the latest firmware using:
https://www.xreal.com/ota/

With the original firmware, the glasses would power on together with the controller, and I would immediately see whatever was displayed on the RC 2 screen.

With the latest firmware, every time I turn on the controller I get the message:
"No video signal input detected. Please try reconnecting."

At that point, I have to unplug the USB-C cable from the controller and plug it back in. Only then does the image appear in the glasses.

The same thing happens if I connect the glasses after the controller has already been powered on. I still get the "No video signal input detected. Please try reconnecting." message and have to disconnect and reconnect the cable before the image appears.

I tried rolling back to the recovery firmware available here:
https://www.xreal.com/ota/recovery

Unfortunately, that didn't change anything.

I don't know if this is the same firmware version that came preinstalled on the glasses, but the problem remains exactly the same. Every time I power on the controller, I have to unplug and reconnect the cable.

Please help, because it's incredibly frustrating to have to do this every single time.

I'm also worried that constantly unplugging and reconnecting the cable will eventually wear out the USB-C port on the controller, and one day it may stop making proper contact altogether. :(

Recovery firmware version:
15.1.02.509_20250623_15.A.00.069_20241211_1.6.0.20250620150908

Latest firmware (July 22):
15.1.03.442_20260722_15.A.00.069_20241211_1.9.0.20260721194602

If nothing else, could you at least let me know which firmware version you're using if you don't have this issue?

Thank you.

Hello everyone.

I would like to buy AR glasses for my Mini 5 Pro drone.

At the moment, I am considering:

1. XREAL Air 2 Pro.
2. RayNeo Air 4 Pro.

Could you please tell me where I can buy them at the lowest price in Europe (with shipping to Poland), and which one you would choose? Or perhaps there are other options that are better than the ones I mentioned.

I read somewhere in the comments on YouTube that recently the XREAL Air 2 Pro no longer works with the RC 2 controller, and apparently nothing is displayed on the screen.

In general, the XREAL glasses have three levels of lens dimming, which means I could probably fly without using the blackout cover. I would prefer not to use the cover and instead adjust the light transmission with a button.

The RayNeo glasses do not have this dimming feature, but they display a much brighter image, so perhaps the drone feed would still be visible on a sunny day without using any cover.

I have never owned any of these glasses, so it is difficult for me to give my own opinion. That is why I would appreciate any advice you can give me.

Hello everyone,

I own both the first and the second version of these headphones.

In the first version, the noise is almost inaudible — it’s there, but very quiet.
In the second version, it’s more noticeable, although in my opinion it’s not terrible.

Many people have said that the noise is present in every unit of these headphones, and that those who don’t hear it simply have worse hearing. There are also people who exchanged their headphones multiple times and claimed that every unit had the same noise. On the other hand, some say that after a replacement, they ended up with a unit that has no noise at all.

Personally, I find it hard to believe that one unit could have noise while another doesn’t, since all of these headphones are built from the same components.

Aside from the noise, there aren’t really any major issues, although it’s not perfect.
Sidetone is quite good — there’s no crackling.
Volume balance is also almost very good — almost, because in a few cases it seemed like the left channel was slightly louder than the right, meaning I could hear things just a bit more toward my left ear rather than centered.

I’ve had the headphones since April 16, and since then they have disconnected from the dongle a few times, but they reconnected automatically almost immediately.

Apart from the noise, I could live with all of this — maybe these issues will be resolved in future updates. Unfortunately, I believe the noise will remain.

I’d like to ask you to share your experiences:

• Is there anyone here whose headphones have absolutely no noise — 0% — meaning when you put them on and turn them on, you hear no difference at all?
• Has anyone replaced their headphones due to noise and received a new unit that truly doesn’t have this issue?
• Is there anyone with a noise-free pair who has let someone else try them and had that confirmed?

I’m asking because everyone’s hearing is different, and what is silent to one person might be noticeable to another.

Please describe your situations, as I’m wondering whether there’s any chance of getting a unit of these headphones with no noise at all.

Thank you.