u/Arteporaccidente

I carry in my car door side, in the trunk I carry a pair of vise grips, adjustable wrench, pliers and sockets for hard tasks.

Penco 2 meter measure tape
Wire curtiera
Automotive resistol glue
Bic Lighter
4 inch scissors
Duck tape
Zip ties
Wire
Torx bits T10 T15 T20 T30
Hex bits h3 h4 h5 h6
Screwdriver bitsPH1 PH2 SL4 SL6
Fanaue Pw-30 screwdriver
Wera mini bit ratchet 5cm
Knipex xs cobra
Tweezerman fine point tweezers
Victorinox alox harvester

Just got this Tanto XTC-70 for my real every day carry. I don’t like to carry a bunch of stuff with me I prefer realistic simple solutions.

This little knife fits inside my wallet and acts as a money clip holding bills in place and also securing the watch from slipping out of the wallet or moving around.

Couldn’t be happier with this solution to carry a small knife in a desk work environment.

So I have a wallet that has a big compartment and I carry a 84mm SAK cadet which is 10mm thick and works well. I want to upgrade to a UTX 70 Gen IV but I’m afraid it is too long or thick for my needs.
I read it’s 3.5 inches or 89mm long which is a bit more than what I want.

My question.
1-Real thickness (not counting pocket clip since I will remove)
2-real length size without glass breaker
3- real weight.

THANK YOU!!!!!

Hello I’m new to this forum! I want to get rid of the can opener and bottle opener in the 93mm alox and replace with a metal file, I read that I can take it from a 91mm ranger or mountaineer and with a 93mm saw back spring I can fit it into the alox farmer.
I also read that I need to file the 91mm tool hole because the alox use a bigger hole.

I selected the parts I need to buy to make this mod;
1/2.5mm rod rivet
2/3mm rod rivet
91mm metal file
93mm back spring
3mm rounded metal file
Rivet tool

Am I missing something?
Anything else I should know?
Any tips?

For Minor repairs, also carry more tools on the trunk.
Replacing the opinel knife for a victorinox harvester soon and adding a 4mm to 1/4 bit conversion to the oknife so I can fit a set of regular bits. I will also include the T10,T15,T20,T25,T30,H3,H4,H5,H6,PH1,PH2,SL4 in a double bit format so there are only 6 bits.

I will then get rid of the SL4 ratchet I carry.

On the back pockets of the maxpedition mini I have 6 tyrap pieces, cord, epoxy putty, butterfly band-aids and antibiotic ointment.