u/De_Kunststof_Expert

Built a bottle opener onto a Makita Mbox, makes opening a beer even more fun. Wooden frame, plexiglass front, painted in Makita colors.

Infinity achterlicht voor m'n brommer gemaakt met rood plexiglas + plexiglas spiegel + ledstrip. Op maat gefreesd met de dremel, daarna afgewerkt met schuurpapier. Als die brandt lijkt het of je in een oneindige tunnel kijkt. Geen idee of dit mag van de RDW maar ik vind het vet.

About 10 years ago I built my first PC case out of aluminium and plexiglas. After a long design process I finally decided to build a new one, this time from plexiglas, wood and steel. Took ages but really happy with how it came out

Couldn't find one in the right size so I made it. 4mm clear plexiglas, old countertop as the base, laminate for the sides. Sets are dust-free.

Windshield cracked, part's discontinued, custom quote was insane. Pulled the old one out, measured it, ordered a sheet of 5mm clear polycarbonate slightly oversized. Cut the curves with a jigsaw, warmed up the rubber seal, dish soap + cord trick to pull it in. Done.

Gave my Ikes Kallax a full makeover. First I raised it up with a wooden base to get some extra height. Then painted the whole thing black. After that I made wooden doors and covered them with 3mm mirrored plexiglass. It took some time, but I'm really happy with the result.