u/IdealExpert181

i live in N.C. and i'm in my late 70s and don't have a will. everything i have is paid for, including home, and i have no debt. i have investments and savings in 6 different accounts, all with PODs established. my wife is the POD on 5 of the accts. and a distant niece is the other one. i hate to use the word assume but it's what i'm doing. my thought is that since i've established the PODs that those 6 accounts are covered and the only thing needed, if any, is a death cert.. since i'm married the house should automatically go over to my wife. am i correct or do i need a will? advice is greatly appreciated.

changed blades today on my new/used 50 hr X370. used block of wood to brace blade and took 1st on off and used block to install new one. the second blade came off again using the block but when i put the new blade on the block and blade stayed secure but the blade bolt just turned and turned with the wrench. i had to brace the belt pully to be able to install the blade. what's wrong? if it's the spindle will it still cut and do i need to replace a 50hr. spindle? i've never had a spindle go bad. thanks for your help.

can someone tell me where the front contact point is with a floor jack on a X370. this model has power steering and it is in the front area.

i've just changed the transmission fluid and used over 2 2/3 qts. and it's still a little low. specs. call for 2.4 qts.. should i continue till the fill line is reached? is it possible he transmission can hold 3 quarts? also can JD grease be mixed with all purpose grease ( JD says no ) or should i replace current grease with my new tube of JD? thanks all

what are the downsides of a used X370 (i think 2021 and looks like new) with 50 hours and what transmission do they have? also do those composite mulch kits really hold up? thank you for your help

recently purchased a X370 and the lady had no information at all and mower had only 44 hours. i'm trying to change the engine and transmission fluid. it seems the x370 has a k57 trans and i looked under the transmission and can't see the drain bolts. it doesn't look like the ones i've seen on youtube. my AI "copilot" says there are no drain plugs with the k57 and the fan and pulley have to be removed to do it. it has been wrong about 70% of the time so i can't trust this AI. how do you drain the oil from this transmission? if there's no plugs couldn't i just pull out the filter in the front and let that drain but it won't empty the transaxle or will it. any help would be greatly appreciated.

does anyone have any good or bad experiences with the x370? it also has a mulch kit with it and where the mulch door slides from right to left to close the chute has about a 3" hole. does anyone know how i can fix this and if so do you have the part #? i had a x300 for 15 years and my deck was beat to death. every year new holes in it. will this x370/44 hours give me the same problem and are the hydrolic lift and power steering potential problems? also are the internal baffles under the deck going to be trouble? thanks for any knowledge and advice.