
u/JaipurJewel

Aaj OP ka Bday hai
To mummy ne banaye mere fav choley bhaturey.. and as always I love extra masala to wo bhi nikal liya alag se…
When I used to be show stopper in college..(2006)
Which was the first bike your father bought for you?
My father bought me a Bajaj boxer CT 100 before this beast… 2006 ki baat hai ye…
Polymer concrete drainage channels
We’re currently in the R&D phase developing polymer concrete drainage channels. Our mix consists of:
• Quartz aggregate (0.3mm – 1.2mm) 65%
• CaCO₃ (calcium carbonate) 18%
• Unsaturated polyester resin (17%)
• Hardeners for curing
We mix everything in a continuous mixing machine and pour into molds placed on a vibrating table to remove air voids. However, after curing and demolding, we’re still getting a lot of visible air pockets/surface voids in the finished parts.
Has anyone here worked with polymer concrete (especially for drainage channels)? What are the best ways to minimize air pockets?
Specific questions:
• Should we increase the resin percentage in the mix? If so, by how much?
• Are there better vibration techniques, additives, vacuum assistance?
• Any other proven tips for achieving a denser, void-free finish with polyester resin concrete?
Any advice or experience would be greatly appreciated! Thanks in advance.
Uploaded pics as well..
complaint regarding expired car..
I live in Pratap nagar, Jaipur and car parking is always an issue around here. I have enough space in front of my house to park two sedans but there is a guy who has 3 cars (2 expired) and none of his car can be parked nearby his house so he sometimes parks his 25+ years old maruti zen in front of our house and I have to park my car somewhere else and I don’t like it as it cause problem to other as well. So How can I file a complaint regarding to those expired cars so that rto can toe up and take into their custody?? anyone did such complaint before? where and how?
Complaint regarding expired vehicle
I live in Pratap nagar and car parking is always an issue around here. I have enough space in front of my house to park two sedans but there is a guy who has 3 cars (2 expired) and none of his car can be parked nearby his house so he sometimes parks his 25+ years old maruti zen in front of our house and I have to park my car somewhere else and I don’t like it as it cause problem to other as well. So How can I file a complaint regarding to those expired cars so that rto can toe up and take into their custody?? anyone did such complaint before? where and how?
Anyone using liquid PVA for coating molds?
We are manufacturing polymer concrete drainage channels by using molds. We always layer (2-3 times) the mold with liquid PVA for a thin film with a hand brush which is taking a lot of time in layering and drying afterwards. Is there anyone who knows what kind of spray gun I can use for layering the PVA liquid evenly?
Anyone using liquid PVA for coating molds?
We are manufacturing polymer concrete drainage channels by using molds. We always layer (2-3 times) the mold with liquid PVA for a thin film with a hand brush which is taking a lot of time in layering and drying afterwards. Is there anyone who knows what kind of spray gun I can use for layering the PVA liquid evenly?
Looking for mold manufacturer
Hey, I am looking for mold manufacturer in India for polymer concrete drainage channels and for it’s cover as well.
Looking for mold manufacturer
Hey, I am looking for mold manufacturer in India for polymer concrete drainage channels and for it’s cover as well.
What I have found was very filthy
I was having tooth ache from last three days so i went to a nearby dental clinic beside 61 sector dispensary pratap nagar. I came in front on the dental clinic rang bell stood for 3-4 minutes outside as nobody responded (maybe thy were out). Meanwhile I called on the given number of that dental clinic board, I was watching opposite side of the clinic to “pratap nagar jain sthanak” a lady from same building came out with a bowl full of a liquid spread it on the road and went in while another person watching her from the 1floor of the same building. Now I went back home and came for an evening walk after dinner after 2 hours was passing by the same road and suddenly I smell if somebody has urinated around, just like public toilets and that was the same place she spread that from a bowl. So what is that? Such an ugliest filthy thing someone can do knowingly…. if anyone is living nearby 61 sector, sheopur road, in front of dispensary, gulab vihar you can yourself check it if someone has cctv installed…
Roads of a smart city
why tf we are paying taxes? what tf is bhajan lul doing? This video is of Sanganer and almost half km road was like this while it rained for 15 minutes only!
Such a great initiative on the occasion of Father’s day..
I was reading newspaper and was just about to skip the front page but suddenly I noticed something written on the very right portion. Such a great initiative by dainik bhaskar and Bikaji family. I appreciate it and just finished planting tulsi seeds in our farmhouse
3D printing filament
How many of you guys using 3D printers? and what make 3D printing filament do you use for modelling? What challenges are you facing? I am trying to figure out the challenges people facing so I can work on it and introduce my own brand in Jaipur..Planning to setup a production line of the same… please comment and give suggestions whatever it could be, related to 3D printing..
Room nearby SMS
Is there any room available for 4 labours nearby SMS hospital for a month only.
Polymer concrete drain channel mold ideas
Does anyone have an idea how these polymer concrete drainage channels are being manufactured? I am preparing homogeneous mixture of aggregate, resin, catalyst and additives and pouring it into a mold I prepared in-house (second pic). But the part (channel) is not coming out easily, breaking, having lots of bubbles, even using PVA as a mold releasing agent.. any idea, how can I get the best part out?
Polymer concrete drain channel mould ideas..
Does anyone have an idea how these polymer concrete drainage channels are being manufactured? I am preparing homogeneous mixture of aggregate, resin, catalyst and additives and pouring it into a mold I prepared in-house (second pic). But the part (channel) is not coming out easily, breaking, having lots of bubbles, even using PVA as a mold releasing agent.. any idea, how can I get the best part out?
When did you last seen….
I was just sitting and wondering that it’s been more than 20years I haven’t seen any JUGNU (firefly). When did you see the jugnu last time and if anyone knows the place I can find jugnu? I want my daughter to see this extinct insect.
So when did you last seen…
I was just sitting and wondering that it’s been more than 20years I haven’t seen any JUGNU (firefly). When did you see the jugnu last time and if anyone knows the place I can find jugnu? I want my daughter to see this extinct insect.
Polymer Concrete Drain
Is there anyone producing polymer concrete drains through continuous process?