Finally, it took probably around 25 hours to move all the factories onto a different island, then just as long to build all the houses and make sure they're all supplied adequetly without interferring with Old World trade routes. I chose to leave the old railway cutting through the centre because idk it looks cool.
This is my first Anno game and it's so much fun.
I think Ditchwater is pretty much done, I could move the rest of the factories but I'm too lazy. Ofc they were on fire as I went to take screenshots, I wasn't told.
The population is around 110,000, the skyscrapers still need violins and dolls + some lifestyle needs, so it'll grow a bit more. Attractiveness is ~13,000 and income is 1.3 million.
Nearly everything is supplied without using the docklands, so the port is cramped.
It's my first time playing an Anno game, so this is my first save file. I think I'm done with this city, I could move the rest of the factories to another island but I'm too lazy for that.
As I was taking these screenshots I realised my factories were on fire, shocker. I wasn't told ofc.
Total population is around 110,000, the skyscrapers still need dolls and violins, plus there's some lifestyle needs to supply. Total attractiveness is ~13,000 and income is 1.3 million.
I wanted an island to retire my military ships since there's not much of a use for them anymore, so I tried my best to make a large naval base. The island is in a central location so it's perfect for sending out ships to different regions.
There are 3 distinct areas, the industrial sector with Engineers and a small collection of factories on the shoreline, the Bruno + Dario combo plus 8 town halls means this island hardly needs any resources. The worker district takes up most of the space as it wraps around the mountain. The final area is the rich commercial port, with a nice park, it also houses the docklands and a museum with the Gods of the Delta collection to help reduce influence costs.
One of the details I like the most is the railway line which travels around the island outskirts, it passes by several mines so it looks as though the rail helps move goods. The oil harbour is located in the middle shore with one power station at either two ends of the island, so the trains do actually pass through often.
This was my first time trying to create something more focused towards roleplay/looks so I'm sure there's a lot I could improve.
It's around £40 more for the 5060 ti, I would love to get the 16gb version but it's far too expensive (nearly £200 more). Is it worth the extra cost or does the lack of vram harm performance that much? It'll only be used for 1080p.
Sadly can't go with AMD as I need CUDA.
This is by far the weirdest issue I've tried to fix with a pc, and I'm pretty stumped on what to do next.
I've just upgraded to a 5060 from a 6600 xt, well tried to, the pc can't detect the gpu at all. I'm able to use the igpu to make it into the bios, but it refuses to boot into windows.
I assumed the gpu was faulty, so I tried it in a different pc, it worked perfectly. I then took the 1660 super from that pc and tried it in my pc, it did not work, same problem as the new 5060. If I put the 6600 xt back in it works normally, I also tried it with a 9070 xt a little while ago and that also had no issues.
These are the other specs of that pc
MSI B450m pro vdh max
Ryzen 5 Pro 5650g
32gb Corsair Vengeance ddr4 3600
Corsair CX650M PSU
I've spent a lot of time messing around with bios settings disabling and enabling stuff, but it hasn't changed the problem. The bios is on the latest update and the cmos has been reset more than once.
I've also removed the pcie wifi card and used DDU to remove the old AMD drivers, but since then I've taken out the ssd entirely to rule out a dodgy windows install being the cause. All but one of the ram sticks have been taken out too.
At this point, the only thing I think the issue could be is the 5650g cpu, It came from a custom prebuilt years ago (not main brand like HP/Dell). I know it's got enhanced security but I've made sure to disable all of that in the bios, I can't find anything online saying that it could cause this issue but I'm not sure what else it could be at this point.
Any help would be appreciated, maybe I missed something simple.
Hi, I've just upgraded my 6600 xt to a 5060 but it doesn't recieve any signal to the monitor.
The fans spin just fine on the gpu.
My specs are
CPU - 5600g
Mobo - B450M Pro vdh max
RAM - 32gb corsair vengeance DDR4
PSU - Corsair CX650M
I've tried a handful of things already,
Reset the CMOS
Removed pcie wifi card
Switched pcie to gen 3 manually, and then gen 2 in the bios
Run DDU to remove the old AMD drivers
Tried both a HDMI and DP cable.
Made sure it's set to UEFI in the BIOS
Weirdly, if I use the IGPU I can make it to the BIOS but I then end up with a blank screen rather than windows login, if it's plugged into the gpu the display doesn't even recieve a signal during startup.
If I remove the gpu the pc goes back to normal and works fine, from the igpu and old gpu.
I did see there was some firmware issues with the 50 series but the issue is I'm unable to make it to windows to check if it's up to date.
Any help would be appreciated. I'm stumped at this point, thinking it may just be faulty.
After 160 hours of good relationships Willie chose to start dropping propaganda on my main island, I wasn't planning on wiping him out since he only has one island left in Old World. Unfortunately I've got a non aggression pact with him, but fortunately I've still got my pirate fleet which was built to take out Beryl, suppose that will be put on hold.
Is this something he always does late game?