Hello, i m kind new to pubg and i paly with my friend, there is a missino where it says to play casual , but we always played normal and quick match, but i dont find any casual to select
Salut.
Unde se poate campa o noapte in Dobrogea de preferatin apropierea unei paduri/lac si sa fie si safe? Din ce stiu gura si cheile Dobrogei au fost inchise..
I m working on sometype of a muffler for my air blower, it broke after a year and i m thinking to improve its airflow, couldnt find exatly what i m looking for, what is the best way to improve airflow so when using it, all the air is going forwards and not some forward some backward, the tip has to me a bit smaller than the base so i can focus on specific areawhen i need it. I m thinking to design and test an air muffler that has a spiral inside it that drives the airflow better, maybe?
What is the - symbol that i got on body7? never seen it, it apperead after i used rectangle pattern. Got frustrated to find what actually made that symbol to appear... if you combine both bodies, the big box and the body 7 , you cannot actually modify the body anymore, but is an error that appeared long after i massivly modified that box and found out that i cannot modify it anymore when i wannted to create a new sketch. The box is an different component
Both bodies are made in the same sketch on the same plane, extrudes at the same time, but different bodies, no join. after that i used move tool - faces, to create an different angle on both bodies, the one on the top has an "inwards" angle i think is the word, than the bottom one. both bodies have 2 side edges, both marked with the red arrows, i want those to align, but i cannot achieve it with the move tool or align tool. Could you help?
I made this battery storage, got inspired from the revolver magazine. I think it s just perfect for keeping it in a toolbox, what do you think?
Here is the link : https://makerworld.com/en/models/3121705-print-in-place-aaa-aa-revolver-magazine#profileId-3521692
The one on the left with no drawers(1) or the one on the right with drawers?(2)
After some confusion from my previous post about the screw box, i decided to remake it, but wasnt sure to which one to post it
Both boxes now have a slide cover.
Thank you!
I made this because when i work and i have to dissasamble a lot of parts and screws, repair it and put it all back, sometimes i forget which screws goes where and i spend some time "knowing what i m doing" or they just dissapear in to the abiss. So i made this box with a hinge. What is different from the others? The HINGE is a lot stiffer, i designed it in a way so the hinge prints flat with the rest of the body. Every "drawer" has its own number or letter.
If you want to test it too here you can find it: https://makerworld.com/en/models/3102522-screw-box#profileId-3497233
I made this because when i work and i have to dissasamble a lot of parts and screws, repair it and put it all back, sometimes i forget which screws goes where and i spend some time "knowing what i m doing" or they just dissapear in to the abiss. So i made this box with a hinge. What is different from the others? The HINGE is a lot stiffer, i designed it in a way so the hinge prints flat with the rest of the body. Every "drawer" has its own number or letter.
If you want to test it too here you can find it: https://makerworld.com/en/models/3102522-screw-box#profileId-3497233
I tried to restart fusion, doesnt work, i tried to re do the extrude, doesnt work, the body doesnt appear. How can i fix this?
I want to start a series on YouTube about fusion 360 and 3D printing in which I explain what it is and how to create what you want. I just don't know if it would be practical to start a series of 1-3 days with an introduction and the basic stuff and then by day 30 we have a locomotive for example or a 3D printed wagon. Or to explain for 30 days something much simpler, like key chains, keys, phone holders, etc. And then start another series with what I mentioned previously
I made this container that holds 2032, 2025, 2016 cell batteries, up to 10. Would you find it usefull ?
First !
Thank you everyone, i m shocked of the popularity of this project!
Second!
I updated the features the battery storage has :
https://makerworld.com/en/models/2239676-battery-storage#profileId-2463557
So i have many projects that i m working on for the past few months and feels hard to jump from one another and remember what i have to do and what it needed to be updated for improvement, how do you keep your notes? Sometimes i just procrastinate just because i have to remember all the troubleshooting i have done. I found something online about Notion or Trello, never touched them befrore, but i wanna know what are you guys using :)
So i have many projects that i m working on for the passt few months and feels hard to jump from one another and remember what i have to do and what it needed to be updated for improvement, how do you keep your notes? Sometimes i just procrastinate just because i have to remember all the troubleshooting i have done. I found something online about Notion or Trello, never touched them befrore, but i wanna know what are you guys using :)
Hey, i got your feedback for the laptop stander that i previously made and i got concerned for people forgotting they have the knob in the way of the laptop when closing it. so i updated to a new version and made it 1.2mm thick from 6mm.
No more slipping and no more hot fingers:D. What do you think?
