u/Repulsive_Unit_468

Hey everyone,
I’m really stuck and could use some help. I’ve got an Ender 3 with:

• Creality 4.2.2 motherboard
• Sprite Pro extruder
• 3D‑Touch (BLTouch clone)
• Standard knob LCD

I’ve tried a bunch of firmware files and none of them seem to work properly with this setup. The probe won’t deploy right, Z won’t go negative, homing gets weird… I’m honestly at the point where I just need a firmware that actually works for this combo.

If anyone has a Google Drive link, Dropbox, or any firmware file that works well with this exact setup, I’d really appreciate it if you could share it with me. I’m new to this and I’m kinda desperate to get the printer running properly.

Thanks heaps.

Hey everyone,
I’m really stuck and could use some help. I’ve got an Ender 3 with:

• Creality 4.2.2 motherboard
• Sprite Pro extruder
• 3D‑Touch (BLTouch clone)
• Standard knob LCD

I’ve tried a bunch of firmware files and none of them seem to work properly with this setup. The probe won’t deploy right, Z won’t go negative, homing gets weird… I’m honestly at the point where I just need a firmware that actually works for this combo.

If anyone has a Google Drive link, Dropbox, or any firmware file that works well with this exact setup, I’d really appreciate it if you could share it with me. I’m new to this and I’m kinda desperate to get the printer running properly.

Thanks heaps.

Hey everyone,
I’m really stuck and could use some help. I’ve got an Ender 3 with:

• Creality 4.2.2 motherboard
• Sprite Pro extruder
• 3D‑Touch (BLTouch clone)
• Standard knob LCD

I’ve tried a bunch of firmware files and none of them seem to work properly with this setup. The probe won’t deploy right, Z won’t go negative, homing gets weird… I’m honestly at the point where I just need a firmware that actually works for this combo.

If anyone has a Google Drive link, Dropbox, or any firmware file that works well with this exact setup, I’d really appreciate it if you could share it with me. I’m new to this and I’m kinda desperate to get the printer running properly.

Thanks heaps.

Hey everyone,
I’m really stuck and could use some help. I’ve got an Ender 3 with:

• Creality 4.2.2 motherboard
• Sprite Pro extruder
• 3D‑Touch (BLTouch clone)
• Standard knob LCD

I’ve tried a bunch of firmware files and none of them seem to work properly with this setup. The probe won’t deploy right, Z won’t go negative, homing gets weird… I’m honestly at the point where I just need a firmware that actually works for this combo.

If anyone has a Google Drive link, Dropbox, or any firmware file that works well with this exact setup, I’d really appreciate it if you could share it with me. I’m new to this and I’m kinda desperate to get the printer running properly.

Thanks heaps.

Hey everyone,
I’m really stuck and could use some help. I’ve got an Ender 3 with:

• Creality 4.2.2 motherboard
• Sprite Pro extruder
• 3D‑Touch (BLTouch clone)
• Standard knob LCD

I’ve tried a bunch of firmware files and none of them seem to work properly with this setup. The probe won’t deploy right, Z won’t go negative, homing gets weird… I’m honestly at the point where I just need a firmware that actually works for this combo.

If anyone has a Google Drive link, Dropbox, or any firmware file that works well with this exact setup, I’d really appreciate it if you could share it with me. I’m new to this and I’m kinda desperate to get the printer running properly.

Thanks heaps.

Hey everyone,
I’m really stuck and could use some help. I’ve got an Ender 3 with:

• Creality 4.2.2 motherboard
• Sprite Pro extruder
• 3D‑Touch (BLTouch clone)
• Standard knob LCD

I’ve tried a bunch of firmware files and none of them seem to work properly with this setup. The probe won’t deploy right, Z won’t go negative, homing gets weird… I’m honestly at the point where I just need a firmware that actually works for this combo.

If anyone has a Google Drive link, Dropbox, or any firmware file that works well with this exact setup, I’d really appreciate it if you could share it with me. I’m new to this and I’m kinda desperate to get the printer running properly.

Thanks heaps.

Hey everyone,
I’m really stuck and could use some help. I’ve got an Ender 3 with:

• Creality 4.2.2 motherboard
• Sprite Pro extruder
• 3D‑Touch (BLTouch clone)
• Standard knob LCD

I’ve tried a bunch of firmware files and none of them seem to work properly with this setup. The probe won’t deploy right, Z won’t go negative, homing gets weird… I’m honestly at the point where I just need a firmware that actually works for this combo.

If anyone has a Google Drive link, Dropbox, or any firmware file that works well with this exact setup, I’d really appreciate it if you could share it with me. I’m new to this and I’m kinda desperate to get the printer running properly.

Thanks heaps.

Hey everyone,
I’m really stuck and could use some help. I’ve got an Ender 3 with:

• Creality 4.2.2 motherboard
• Sprite Pro extruder
• 3D‑Touch (BLTouch clone)
• Standard knob LCD

I’ve tried a bunch of firmware files and none of them seem to work properly with this setup. The probe won’t deploy right, Z won’t go negative, homing gets weird… I’m honestly at the point where I just need a firmware that actually works for this combo.

If anyone has a Google Drive link, Dropbox, or any firmware file that works well with this exact setup, I’d really appreciate it if you could share it with me. I’m new to this and I’m kinda desperate to get the printer running properly.

Thanks heaps.

Hi everyone, PLEASE HELP ME.
I’ve spent DAYS trying to get my Ender‑3 working again and I’m honestly stuck. This is my first 3D printer and I’m not good with firmware or coding at all. I can’t code, I can’t compile Marlin, and all the “easy builders” are behind paywalls now. I just need a working .bin file I can put on my SD card and update my printer with. I’ve searched everywhere and I’m getting nowhere.

Here is my exact setup:

• Ender‑3 (original)
• Creality V4.2.2 mainboard
• CPU: STM32F103RET6
• Sprite Pro extruder
• CR Touch (5‑pin port)
• Blue knob LCD with ONE rainbow ribbon cable

I’ve checked Creality’s site, GitHub, Reddit, forums, YouTube… I can’t find ANY firmware that supports Sprite Pro + CR Touch + V4.2.2 + knob LCD all together. Everything I find is either for the V2 or missing CR Touch support.

I’m really stuck and just want my printer working again.
If anyone has a firmware that works with this exact setup, PLEASE send me a Google Drive / Dropbox / direct download link to the .bin file.

Thank you so much.

Hi everyone, PLEASE HELP ME.
I’ve spent DAYS trying to get my Ender‑3 working again and I’m honestly stuck. This is my first 3D printer and I’m not good with firmware or coding at all. I can’t code, I can’t compile Marlin, and all the “easy builders” are behind paywalls now. I just need a working .bin file I can put on my SD card and update my printer with. I’ve searched everywhere and I’m getting nowhere.

Here is my exact setup:

• Ender‑3 (original)
• Creality V4.2.2 mainboard
• CPU: STM32F103RET6
• Sprite Pro extruder
• CR Touch (5‑pin port)
• Blue knob LCD with ONE rainbow ribbon cable

I’ve checked Creality’s site, GitHub, Reddit, forums, YouTube… I can’t find ANY firmware that supports Sprite Pro + CR Touch + V4.2.2 + knob LCD all together. Everything I find is either for the V2 or missing CR Touch support.

I’m really stuck and just want my printer working again.
If anyone has a firmware that works with this exact setup, PLEASE send me a Google Drive / Dropbox / direct download link to the .bin file.

Thank you so much.

Hi everyone, PLEASE HELP ME.
I’ve spent DAYS trying to get my Ender‑3 working again and I’m honestly stuck. This is my first 3D printer and I’m not good with firmware or coding at all. I can’t code, I can’t compile Marlin, and all the “easy builders” are behind paywalls now. I just need a working .bin file I can put on my SD card and update my printer with. I’ve searched everywhere and I’m getting nowhere.

Here is my exact setup:

• Ender‑3 (original)
• Creality V4.2.2 mainboard
• CPU: STM32F103RET6
• Sprite Pro extruder
• CR Touch (5‑pin port)
• Blue knob LCD with ONE rainbow ribbon cable

I’ve checked Creality’s site, GitHub, Reddit, forums, YouTube… I can’t find ANY firmware that supports Sprite Pro + CR Touch + V4.2.2 + knob LCD all together. Everything I find is either for the V2 or missing CR Touch support.

I’m really stuck and just want my printer working again.
If anyone has a firmware that works with this exact setup, PLEASE send me a Google Drive / Dropbox / direct download link to the .bin file.

Thank you so much.

Hi everyone, PLEASE HELP ME.
I’ve spent DAYS trying to get my Ender‑3 working again and I’m honestly stuck. This is my first 3D printer and I’m not good with firmware or coding at all. I can’t code, I can’t compile Marlin, and all the “easy builders” are behind paywalls now. I just need a working .bin file I can put on my SD card and update my printer with. I’ve searched everywhere and I’m getting nowhere.

Here is my exact setup:

• Ender‑3 (original)
• Creality V4.2.2 mainboard
• CPU: STM32F103RET6
• Sprite Pro extruder
• CR Touch (5‑pin port)
• Blue knob LCD with ONE rainbow ribbon cable

I’ve checked Creality’s site, GitHub, Reddit, forums, YouTube… I can’t find ANY firmware that supports Sprite Pro + CR Touch + V4.2.2 + knob LCD all together. Everything I find is either for the V2 or missing CR Touch support.

I’m really stuck and just want my printer working again.
If anyone has a firmware that works with this exact setup, PLEASE send me a Google Drive / Dropbox / direct download link to the .bin file.

Thank you so much.

Hi everyone, PLEASE HELP ME.
I’ve spent DAYS trying to get my Ender‑3 working again and I’m honestly stuck. This is my first 3D printer and I’m not good with firmware or coding at all. I can’t code, I can’t compile Marlin, and all the “easy builders” are behind paywalls now. I just need a working .bin file I can put on my SD card and update my printer with. I’ve searched everywhere and I’m getting nowhere.

Here is my exact setup:

• Ender‑3 (original)
• Creality V4.2.2 mainboard
• CPU: STM32F103RET6
• Sprite Pro extruder
• CR Touch (5‑pin port)
• Blue knob LCD with ONE rainbow ribbon cable

I’ve checked Creality’s site, GitHub, Reddit, forums, YouTube… I can’t find ANY firmware that supports Sprite Pro + CR Touch + V4.2.2 + knob LCD all together. Everything I find is either for the V2 or missing CR Touch support.

I’m really stuck and just want my printer working again.
If anyone has a firmware that works with this exact setup, PLEASE send me a Google Drive / Dropbox / direct download link to the .bin file.

Thank you so much.

I've got a bit of a strange situation and I'm hoping someone can help.

Long story short, I bought this printer second-hand. It came running Klipper from a Raspberry Pi, and the previous owner had already upgraded the motherboard to a BIGTREETECH SKR Mini E3 V3.0.

Unfortunately, I can't keep using the Raspberry Pi because I don't have Wi-Fi where my printer is, and to be honest, the Raspberry Pi/Klipper setup is just too complicated for me. I'd much rather run Marlin directly from the printer using an SD card. At the moment, when I unplug the Raspberry Pi, the printer just shows a blue screen because there's no firmware on the board.

I did try following a few guides to make my own Marlin firmware, but I have absolutely no idea what I'm doing. 😅 This is my first 3D printer, so I'm completely new to all of this.

My printer has:

• Ender 3
• BIGTREETECH SKR Mini E3 V3.0
• Creality Sprite Extruder Pro Kit
• CR Touch

I'm hoping someone has a firmware.bin or a similar Marlin firmware that I can simply download, copy to an SD card, and flash to get the printer back to running Marlin.

I know it probably won't be a perfect match, but if anyone has a firmware for a similar setup that I could try, I'd really appreciate it. Even if it needs a few small changes later, I'd just like to get the printer running again.

If it helps, I can upload photos of the printer, motherboard, and wiring.

Thanks in advance! Any help would mean a lot.

I've got a bit of a strange situation and I'm hoping someone can help.

Long story short, I bought this printer second-hand. It came running Klipper from a Raspberry Pi, and the previous owner had already upgraded the motherboard to a BIGTREETECH SKR Mini E3 V3.0.

Unfortunately, I can't keep using the Raspberry Pi because I don't have Wi-Fi where my printer is, and to be honest, the Raspberry Pi/Klipper setup is just too complicated for me. I'd much rather run Marlin directly from the printer using an SD card. At the moment, when I unplug the Raspberry Pi, the printer just shows a blue screen because there's no firmware on the board.

I did try following a few guides to make my own Marlin firmware, but I have absolutely no idea what I'm doing. 😅 This is my first 3D printer, so I'm completely new to all of this.

My printer has:

• Ender 3
• BIGTREETECH SKR Mini E3 V3.0
• Creality Sprite Extruder Pro Kit
• CR Touch

I'm hoping someone has a firmware.bin or a similar Marlin firmware that I can simply download, copy to an SD card, and flash to get the printer back to running Marlin.

I know it probably won't be a perfect match, but if anyone has a firmware for a similar setup that I could try, I'd really appreciate it. Even if it needs a few small changes later, I'd just like to get the printer running again.

If it helps, I can upload photos of the printer, motherboard, and wiring.

Thanks in advance! Any help would mean a lot.

I've got a bit of a strange situation and I'm hoping someone can help.

Long story short, I bought this printer second-hand. It came running Klipper from a Raspberry Pi, and the previous owner had already upgraded the motherboard to a BIGTREETECH SKR Mini E3 V3.0.

Unfortunately, I can't keep using the Raspberry Pi because I don't have Wi-Fi where my printer is, and to be honest, the Raspberry Pi/Klipper setup is just too complicated for me. I'd much rather run Marlin directly from the printer using an SD card. At the moment, when I unplug the Raspberry Pi, the printer just shows a blue screen because there's no firmware on the board.

I did try following a few guides to make my own Marlin firmware, but I have absolutely no idea what I'm doing. 😅 This is my first 3D printer, so I'm completely new to all of this.

My printer has:

• Ender 3
• BIGTREETECH SKR Mini E3 V3.0
• Creality Sprite Extruder Pro Kit
• CR Touch

I'm hoping someone has a firmware.bin or a similar Marlin firmware that I can simply download, copy to an SD card, and flash to get the printer back to running Marlin.

I know it probably won't be a perfect match, but if anyone has a firmware for a similar setup that I could try, I'd really appreciate it. Even if it needs a few small changes later, I'd just like to get the printer running again.

If it helps, I can upload photos of the printer, motherboard, and wiring.

Thanks in advance! Any help would mean a lot.

I've got a bit of a strange situation and I'm hoping someone can help.

Long story short, I bought this printer second-hand. It came running Klipper from a Raspberry Pi, and the previous owner had already upgraded the motherboard to a BIGTREETECH SKR Mini E3 V3.0.

Unfortunately, I can't keep using the Raspberry Pi because I don't have Wi-Fi where my printer is, and to be honest, the Raspberry Pi/Klipper setup is just too complicated for me. I'd much rather run Marlin directly from the printer using an SD card. At the moment, when I unplug the Raspberry Pi, the printer just shows a blue screen because there's no firmware on the board.

I did try following a few guides to make my own Marlin firmware, but I have absolutely no idea what I'm doing. 😅 This is my first 3D printer, so I'm completely new to all of this.

My printer has:

• Ender 3
• BIGTREETECH SKR Mini E3 V3.0
• Creality Sprite Extruder Pro Kit
• CR Touch

I'm hoping someone has a firmware.bin or a similar Marlin firmware that I can simply download, copy to an SD card, and flash to get the printer back to running Marlin.

I know it probably won't be a perfect match, but if anyone has a firmware for a similar setup that I could try, I'd really appreciate it. Even if it needs a few small changes later, I'd just like to get the printer running again.

If it helps, I can upload photos of the printer, motherboard, and wiring.

Thanks in advance! Any help would mean a lot.

I've got a bit of a strange situation and I'm hoping someone can help.

Long story short, I bought this printer second-hand. It came running Klipper from a Raspberry Pi, and the previous owner had already upgraded the motherboard to a BIGTREETECH SKR Mini E3 V3.0.

Unfortunately, I can't keep using the Raspberry Pi because I don't have Wi-Fi where my printer is, and to be honest, the Raspberry Pi/Klipper setup is just too complicated for me. I'd much rather run Marlin directly from the printer using an SD card. At the moment, when I unplug the Raspberry Pi, the printer just shows a blue screen because there's no firmware on the board.

I did try following a few guides to make my own Marlin firmware, but I have absolutely no idea what I'm doing. 😅 This is my first 3D printer, so I'm completely new to all of this.

My printer has:

• Ender 3
• BIGTREETECH SKR Mini E3 V3.0
• Creality Sprite Extruder Pro Kit
• CR Touch

I'm hoping someone has a firmware.bin or a similar Marlin firmware that I can simply download, copy to an SD card, and flash to get the printer back to running Marlin.

I know it probably won't be a perfect match, but if anyone has a firmware for a similar setup that I could try, I'd really appreciate it. Even if it needs a few small changes later, I'd just like to get the printer running again.

If it helps, I can upload photos of the printer, motherboard, and wiring.

Thanks in advance! Any help would mean a lot.

I've got a bit of a strange situation and I'm hoping someone can help.

Long story short, I bought this printer second-hand. It came running Klipper from a Raspberry Pi, and the previous owner had already upgraded the motherboard to a BIGTREETECH SKR Mini E3 V3.0.

Unfortunately, I can't keep using the Raspberry Pi because I don't have Wi-Fi where my printer is, and to be honest, the Raspberry Pi/Klipper setup is just too complicated for me. I'd much rather run Marlin directly from the printer using an SD card. At the moment, when I unplug the Raspberry Pi, the printer just shows a blue screen because there's no firmware on the board.

I did try following a few guides to make my own Marlin firmware, but I have absolutely no idea what I'm doing. 😅 This is my first 3D printer, so I'm completely new to all of this.

My printer has:

• Ender 3
• BIGTREETECH SKR Mini E3 V3.0
• Creality Sprite Extruder Pro Kit
• CR Touch

I'm hoping someone has a firmware.bin or a similar Marlin firmware that I can simply download, copy to an SD card, and flash to get the printer back to running Marlin.

I know it probably won't be a perfect match, but if anyone has a firmware for a similar setup that I could try, I'd really appreciate it. Even if it needs a few small changes later, I'd just like to get the printer running again.

If it helps, I can upload photos of the printer, motherboard, and wiring.

Thanks in advance! Any help would mean a lot.