u/SCROWRLD

Feel like throwing it in the dumpster , change the handlebars and put the new throttle and everything on and now the bike literally won’t start but all of the electronics work, but it just keeps trying to start and will not. I’ve adjusted the throttle on the handlebar and still nothing it started up beautifully with the new exhaust, but now I don’t know what to do. Do I look at the throttlebody and how do I even reset or fix the idol? Idk man shits frustrating . This is my first bike and I really just wanted to work. I’ve been putting in crazy amounts of hours on it.

Fixed wiring !!

Polish came in this morning and works great !!! Just a little polishing today and took off old exhaust and the whole back end :) more to come !

Any advice on how to get the black spots off the exhaust ? Can I sand it ? If so what grit

Wet sanded all the primer and we have our color on all of our plastics and tank:) can’t wait till the 2K satin automotive topcoat gets here!!!

I sanded everything with 400 then did two coats of primer. Used a little bit of that rainwater to wet sand outside😂 and then I finished off using my spray bottle, but I’ll come back tomorrow and wet sand the primer because I did do a few few coats on areas where there were scratches and imperfections so that when I go to wet sand the primer that should just disappear:)

Ordered:
R6 throttle and matching left side (do not buy R6S throttle) part number 2C0-26240-00-00
Exhaust springs
New foot pegs
Bar ends
Drag bars 7/8
Levers
2k satin top coat (apparently needed so that the gas doesn’t eat away and crinkle the paint. The first time it touches the tank.)

Finished up getting the tank off, which was a pretty easy process because the fuel pump is apparently on the inside of the tank so it wasn’t too difficult not even a single drop leaked onto the ground. Was able to catch everything with a paper towel. I’ll be wet sanding this weekend and then priming and then wet sanding again and then applying that really cool grey from the concept photo I made:)

Hey I’m Justin !! First post in the group /just joined
. First bike and now this , got it a week ago and started leaking and didn’t discover the issue until I took the sprocket cover off. First option is getting a really good high-quality hightemp job weld,, well second option is getting an aluminum tig welder and third option which we do not want to fucking do is tear it apart and replace it. Bike runs fine and revs all the way to 15,000 just this one issue.