Login

u/Several_Winner_9752

r/QualityTacticalGear r/Plumbing r/army r/AutoDetailing r/gta5 r/Carpentry
Image 1 — Shaw Arc V4 to Spc
Image 2 — Shaw Arc V4 to Spc
Image 3 — Shaw Arc V4 to Spc
▲ 26 r/QualityTacticalGear

Shaw Arc V4 to Spc

Haven't found any videos showing mounting options

Would it be better to attach tubes to the placard itself vs the PC and if so why

Also not liking this space behind the placard as it seems it can move or come off if snagged. Even with adding clips to the upper attachment I don't see it fixing that issue.

It doesn't leave much room to access my tubes in its current setup, I'm sure I just don't have this oriented properly. Any help is appreciated

u/Several_Winner_9752 — 15 hours ago
▲ 2 r/AutoDetailing

DeWalt DCM848B (5" cordless polisher) Interchangeable backing plate?

Looking to get my first polisher for vehicles and other odds and ends. Was going to get a used rupes or griots combo. Ultimately think cordless dewalt will work for me since I have the batteries and won't be doing consistent vehicle polishing.

I read 5" is a good size since you can usually fit a 3" or 6" backing plate. Haven't found any posts or listing for DeWalt compatible backing plates though. Does anyone have any experience with this, as I'd be using a 3" polisher quite a bit for non vehicle tasks.

reddit.com
u/Several_Winner_9752 — 5 days ago
▲ 1 r/Plumbing

What fitting for this drainage scenario

Contractors never finished so I'm trying to get this completed.

4" drainage line on bottom and left side

1 1/2" sch 40 coming from sump pump

They said to drill a hole into the T or drainage line underneath and use outdoor putty to hold it. That doesn't sound right, but I can't find any fitting that looks like itd work in this scenario

u/Several_Winner_9752 — 22 days ago
▲ 0 r/Carpentry

How to make this cut

sloped ceiling, cut this 8° in various positions and nothing makes it butt up. Am I finding the wrong degree?

cut it upside down and backwards in flat position and upright position. Cut it oriented how it would be on the wall in a. flat position and upright as well

I'm lost

u/Several_Winner_9752 — 1 month ago
▲ 8 r/army

7 year Guard E5 25 years old

Since basic I've always had gripes with the guard and felt like I chose wrong. Got EIB, air assault, deployment in my time, recently got a regiment dude as my new section sgt and seeing him just reminds me of what I never did. I put in for ranger and the unit pulled my slot due to funding, I always wanted to go for RASP and say I was a ranger when I hang my uniform up one day.

Wife and I wanna move out of state and I've decided this is the time to do it. Goal is to get to RASP as soon as possible, active recruiter can't sign me option 40 since prior service. Regiment dude said to go to RASP as a 4 so I can grow up as a Joe in battalion or else I'll have a real hard time adapting and it's not the way to do it.

My plan when I go to the recruiter this week is to see if I can get 173rd slot for 11C (my current MOS) since they're more highspeed then conventional. If that duty station isn't an option I'll just sign a generic airborne contract so I'll at least end up somewhere that has a higher chance of me going to Ranger school.

I'm debating asking for a demotion to go active and hope that I'd get to RASP within a year so I don't get to batt as an NCO. Not sure if that's smart or not, just going off of what my SSG said that came from that life.

My alternative is to join the WTC guard side, guaranteed airborne, guaranteed Benning. Probably a high chance they send to Ranger school in a reasonable time. I'd still have to sign an active contract and try for benning then do RASP as soon as they let me

I'll take a chicken sandwich with extra pickles

reddit.com
u/Several_Winner_9752 — 2 months ago