u/Vaata_10

Everything is SRAM RED AXS MY24.(only Chainrings are from Carbon TI)
My Bike

I recently changed,the Fd on my Factor Ostro VAM 2.0 and now I have a strange clearance issue with the front derailleur. Everything was mounted by the bike shop. My bike is now 2 Weeks there he cant fix it.

As you can see in the photo:

• The front derailleur sits extremely close to the crank arm.
• At the same time, the chain is rubbing against the front derailleur cage.
• So moving the derailleur further outward does not seem like a simple solution, because the clearance to the crank arm is already almost zero.

Current spacer setup:

Drive side: 3 + 1 + 1 mm
Non-drive side: 3 mm.

I contacted Factor as well, but I haven't received an answer yet.

Anyone can help me?

Everything is SRAM RED AXS MY24.

I recently changed the crankset on my Factor Ostro VAM 2.0 and now I have a strange clearance issue with the front derailleur.

As you can see in the photo:

• The front derailleur sits extremely close to the crank arm.
• At the same time, the chain is rubbing against the front derailleur cage.
• So moving the derailleur further outward does not seem like a simple solution, because the clearance to the crank arm is already almost zero.

Current spacer setup:

Drive side: 3 + 1 + 1 mm
Non-drive side: 3 mm

Bike Shop told me that the Ostro VAM 2.0 should use the standard SRAM crank spindle, not the Wide version.

I contacted Factor as well, but I haven't received an answer yet.

Anyone can help me?