Can I use 2x 20A breakers to somehow power my 40A 120v AC?

Can I use 2x 20A breakers to somehow power my 40A 120v AC?

I am limited with my generator outputs, but my HVAC is less than 60A total. The fan is easy to power with a 20A plug, but the condenser outside is 40A 120v according to the side panel.

I seem to have 3x 20A outlets. Any thoughts?

Image attached of my 6000W gen outlets.

Update: Thanks boys! Figured I’d check. Fortunately power outages aren’t common for us, and this little buddy still powers the router, fridges, TVs, and gaming consoles as needed.

I’ll also mention a pro for tank water heaters is that the heat will last a couple days if you use it sparingly for quick showers.

u/ZhaloTelesto — 20 hours ago

Antibiotic Recommendations

Hey guys. My new fish came to me with a couple scales missing and I figured it was just stress.

It’s been about 2 weeks now and the scale loss regions has resulted in raised ulcers.

Kinda guessing it’s not cancer, and ai have eliminated most common illness. I’ve done a couple other treatments, am using salt, and have even done some extended blue baths.

Can anyone recommend some antibiotics they’ve had success with? I’m not concerned about losing my cycle since this is a quarantine tank.

My parameters are all in normal ranges btw. Tank has been cycled and has held other fish in the past.

Just need some recommendations on drug brands or mediums.

reddit.com
u/ZhaloTelesto — 6 days ago
▲ 16 r/JettaGLI+1 crossposts

Oil Extraction - Oil Change 2024 GLI

Hey guys, I did my first top side oil change today and wanted to share my experience.

With the oil warm, I used a $20 Amarine pump that’s available online. Stuck the tube down the dip stick hole while I cracked open the filter and upper oil plug.

I got maybe 95% of the oil out in about 5 min, then shut off the pump and came back in another 5min to get what was left over.

After replacing my filter and filling her back up, I’m guessing I got 99% of the used oil out. Maybe more. I added 6 quarts of Valvoline 0W20 and that got me half way up the dip stick after running the engine a bit.

I’ll note I used a Mobil M1C-258A oil filter and it felt tighter than the OEM ones I’ve used before. I always get nervous about crimping them.

All in all, it was an easy experience compared to climbing under. Took maybe 35min, set up through clean up.

reddit.com
u/ZhaloTelesto — 7 days ago

Attempted my first Murph

I have started speed walking into running over the past 6 weeks. I’ve been happy with my progress having never worked out before, but wanted to expand into calisthenics.

The Murph, without weight, seemed attainable.

Today I did the 2 miles, 60 pull ups, 100 push ups, and 180 squats in about 1 hour. My upper body especially gave out.

I plan to stick with it daily since it still felt good and I hope to be able to achieve the full work out in less than 75min in 30 days.

May post again with an update, but wanted to share my experience.

FYI, I started exercising about 6 weeks ago. 30M 5’11” and 155lbs, down to 147lb (not trying to lose weight). Never played sports but I do ski in the winter and practice yard work in the warm months.

reddit.com
u/ZhaloTelesto — 2 months ago

Any one have links to documentation or videos on how to adjust the shutter speed on the camera?

Just replaced the capacitors and it’s probably best to do this now before reassembly.

reddit.com
u/ZhaloTelesto — 2 months ago