u/carbonateddairydrink

2015 rzr 900 idle/starting problems

When its cold, I can start it pretty easily, and itll idle as long as I let it, but once I put it in gear and try to move it, it wont stay idling after i throttle up to move it, without keeping throttle on. Once that happens, I cant start it or idle without added throttle.

Valve lash is good, fuel pressure is 58psi, new plugs, and both have good spark, air filter is clean (same problem with or without air filter, for some more context), new belt on it, timing is good as far as I can tell, good battery, good leads, good injectors, as far as I can tell. The plastic boots between the intake manifold and the cylinder head are fine. Feels like good compression. Throttle body's clean, new gas pedal, no engine codes. What else can I check? I feel like itd be nice to be able to see the fuel delivery and adjust it to just brute force the problem lol.

Its the drive by wire model, so the IAC is in the throttle body, for some additional context.

Genuinely any info is appreciated, if i left it out here but checked the suggestion anyway, ill let you know. I am fuckin STUMPED. Thanks everybody for the help previously.

So now, when its cold, I can start it pretty easily, and itll idle as long as I let it, but once I put it in gear and try to move it, it wont stay idling after i throttle up to move it, without keeping throttle on. Once that happens, I cant start it or idle without added throttle.

Valve lash is good, fuel pressure is 58psi, new plugs, and both have good spark, air filter is clean (same problem with or without air filter, for some more context), new belt on it, timing is good as far as I can tell, good battery, good leads, good injectors, as far as I can tell. The plastic boots between the intake manifold and the cylinder head are fine. Feels like good compression. Throttle body's clean, new gas pedal, no engine codes. What else can I check? I feel like itd be nice to be able to see the fuel delivery and adjust it to just brute force the problem lol.

Genuinely any info is appreciated, if i left it out here but checked the suggestion anyway, ill let you know. I am fuckin STUMPED. Thanks everybody for the help previously.

Shallow well

Hey yall. I pounded a shallow well in last year, water at 8 feet, drove it to 12. This summer with the heat and no consistent rain, it ran dry, so im pounding another one (intending on going to at least 20ft), since that one hit a rock or something. Hoping it refills eventually and can be used for irrigation. Anyway, im trying to drive this new one, and im using one of the gas post pounders, as ive seen people have a lot of luck with those.

Weirdly enough though, it didnt seem like I was making a ton of progress, so i swapped to the manual one, and got it dug in a little deeper. Am I doing something wrong? Like what am I missing here? I can add any information if anybody needs it, pics, etc, if that would help, just lemme know.

Any info is appreciated. Thanks.

So I booted up pirate101 again, after idk how many years. Hopped on my level 15 witchdoctor, and it doesnt have a story line quest open, literally just a zeke quest. I have the violet windstone if that helps? But im honestly not sure what im supposed to do, and I just closed it and went back to wiz. But I wanted to come on here and ask if anybody else has had the same issue, how to fix it, or what to do aside from just making a new character. Any info is appreciated, thanks.

EDIT: SOLVED!! Yall are great. I already have a tough time getting into pirate101, and i was about to fully give up lol. I was apparently on the 3 queen's quest :) thanks to the both of you, its such an uncannily similar system to wiz, but still different enough to not know what I was looking at lol.

Is anybody else getting an error 1005 while trying to access the wiki over VPN? Any resolution aside from just turning the VPN off? Any info would be appreciated.

Here's what's new:

Spark plugs

Pedals

Fuel pump (im at 58psi exactly)

Fuel line

Oil flushed and changed/filter

Here's what is fixed/verified to be good:

Air filter

Throttle body

Valve lash

As far as I can tell, injectors are firing, but i have no way to test pattern/consistency.

Vehicle wont start without pressing the throttle in, and it just wont idle under like 1600rpm.

With that problem, and the things above, any information on what to do next would be very much appreciated.

Thanks.

Anybody need to do waterworks? Im not tryna solo it, but i want the hat and boots on my balance. Wanted to see if anybody needed to do it before hittin the ol team up kiosk or GTP mercs. Ill probably do 1 or 2 tonight.

Under all 4 intake cam lobes, zero clearance, and its keeping me from getting compression to effectively start it. Itll catch sometimes, but even if you do, it wont run well. Valve bucket is a 500, and there are no shims underneath. Are there different thickness buckets (im assuming that number is referring to the height/thickness between the valve stem and the cam lobe)? Or is the head just cooked and too far gone? It was recently rebuilt in the top end, for reference and its been having problems ever since, but thats when I picked it up from a neighbor. Thanks for any info on this, I like the adjustment method on my tractor better 😂 just a flathead screw lmao.