Using an Aquila x2 which is basically an Ender 3v2 clone. If they are, does it matter? First pic is right side (it’s on top) second is left side (it’s on the inner roller)
im trying to make a custom load cell probing mod with an rp2040, hx711 and logic level converter using this tutorial https://www.youtube.com/watch?v=r3Bz-Iza5p8. the problem is that it isnt very in depth, for example he says we need 2 load cells but only wires one, he isnt specific on the wiring in general and he uses a custom toolhead shroud that wouldnt work with my aquila x2. any in depth video tutorials and shrouds i can use for this? i understand this isnt a super common mod
The holes are only on the first 2 so maybe it was a clog that fixed mid print but still some plowing. Weird that it’s on half the circles and not the other half tho so I don’t think it’s the offset.
Aquila x2 running klipper/fluidd with moonraker
Orca slicer
Black pla from 3Dhojor
Running my Aquila x2 h32 from my nitro 5. Used stas2z config file and stevegotthardt firmware.bin
Currently completing my missing high school requirements (sec 4 sec + 5 science + sec 5 math)
And I’m going into technique for electrical engineering. Should I stay in electrical or go into pure and applied science if I wanna do mechatronics engineering in uni. Also I believe that the requirements for electrical engineering are only sec 4 math and science but pure and applied is both sec 4 and 5 math + science. When I applied to dcs i selected technique so will I only be getting sec 4 and math and science? Because if I wanna switch to pure and applied i would need the sec 5 classes too
looking to install load cell probing on my Aquila x2. Does anyone know a tool head design to mount it? Or can anyone make one?
I’m looking to install load cell probing on my Aquila x2. Does anyone know a tool head design to mount it? Or can anyone make one?
username: Meir aialon. im so close only 20 coins whoever does it ill do it back. code is 89131883
username: Meir aialon. im so close only 10 cents whoever does it ill do it back. code is 89131883 game is free gifts
username: Meir aialon. im so close only 10 cents whoever does it ill do it back. code is 89131883
username: Meir aialon. im so close only 10 cents whoever does it ill do it back. code is 89131883
Edit: THANKS SO MUCH GUYS IM AT 0.01 I NEED ONE MORE PERSON AND ILL ADD YOUR CODE BACK
Voxelab Aquila x2. Using 210c on the nozzle 65c on the bed, 100% speed, 100% flow with no glue and z offset at -0.12. Is it a settings problem? Mine used to be 210c on the nozzle 65c on the bed, 70% speed 125% flow with glue and z offset at -0.11, should I change it back?
The inner wheel on my Aquila x2 has no eccentric nut so when adjusting my gantry I tightened the nut in the wheel instead. Is this ok or should I do something