I have been searching for something similar minimal stand that I can carry in my bag without adding bulk.
couldn't find it so designed a 3D printable stand. although streamdeck is tilted but the additional 40 Degrees help with the view angles. I am sharing the link to the model file if anyone wants to download and print.
Designed this minimal stand that stays with it, no extra bulk in your bag 😁. Here is the link to download if you need https://makerworld.com/models/3181101
available on makerworld - search for 3181101
reddit ai thinks this is advert, not it. i don't need anything, just helping people who are looking for something cuz' i had been looking for this for ages.
Designed and printed this minimal stand for my streamdeck that just stays along with it. Didn't search on the internet before designing so if there already exists something like this, well thatss a waste of 15mins 😅.
I like to save my filament, keep plastic use to minimum so such a flimsy design, it works though, been using for 2 months.
2 improvements i'll do when i get time:
- add an angle to the base so the base makes more contact to the surface and we can stick something grippy to it, it works now but that is just better design : p
- right now the four corners need like half a drop of CA to keep it stuck to the base, it will remain there without the glue if you don't toss it into a bag, but i do, so i used glue, will add some locking so others can skip glue.
Lemme know if more experienced designers see this and can suggest any improvements.
P.S i know it is already tilted but sometimes the higher angle helps.
Designed and printed this minimal stand for my streamdeck that just stays along with it. Didn't search on the internet before designing so if there already exists something like this, well thatss a waste of 15mins 😅.
I like to save my filament, keep plastic use to minimum so such a flimsy design, it works though, been using for 2 months.
2 improvements i'll do when i get time:
- add an angle to the base so the base makes more contact to the surface and we can stick something grippy to it, it works now but that is just better design : p
- right now the four corners need like half a drop of CA to keep it stuck to the base, it will remain there without the glue if you don't toss it into a bag, but i do, so i used glue, will add some locking so others can skip glue.
Lemme know if more experienced designers see this and can suggest any improvements.
P.S i know it is already tilted but sometimes the higher angle helps.
Anyone here does clear resin printing? My order would be between Rs. 100-1000. It could be 150 as well, so, please only those who are interested.
I'll only dm whose work I like best. Just upload 1 picture in the comment of your work if you'd be interested.
It's a watch case so... , if it's like 30-40g I'll get 2-3x printed.
I've FDM so please don't comment about that. I need something as clear as glass (5-10% opacity would be fine) , If it's not feasible for you, please don't either.
Designed and printed this minimal stand for my streamdeck that just stays along with it. Didn't search on the internet before designing so if there already exists something like this, well thats a waste of 15mins 😅.
I like to save my filament, keep plastic use to minimum so such a flimsy design, it works though, been using for 2 months.
2 improvements i'll do when i get time or tonight before posting to makerworld:
- add an angle to the base so the base makes more contact to the surface and we can stick something grippy to it, it works now but that is just better design : p
- right now the four corners need like half a drop of CA to keep it stuck to the base, it will remain there without the glue if you dont toss it into a bag, but i do, so i used glue, will add some locking so others can skip glue.
Lemme know if more experienced designers see this and can suggest any improvements.
P.S. i use these 2 items for the type c port to keep disconnections to a minimum.
- [Magnetic type-c straight](https://s.8kb.in/typecmagneticadapter)
- [L-connector](https://s.8kb.in/typecladapter)
P.P.S i know it is already tilted but sometimes the higher angle helps.
Had ordered a spool of eSun ABS on 25-jun-2025 ( last year). ​
Opened today and it was still packed airtight; unlike some (brahmalabs 😒). Although the winding is pretty wonky, let's see if any tangles happen, will update here. ​
Did not dry the filament, printed absolutely fine without any stringing or warping. ​
Used the default high quality profile shipped with P2S-Bambu Studio. On PEI (default) build plate. Did not change any setting, just sliced and hit print. Attaching timelapse in comment. ​
​ ​
The little warpping you see on the left object in the 3rd pic is because i bent it after removing the from the plate and only then realised that i should create this post and took the picture 😅 ​